PPaT Wiki
စာရွက်စာတမ်းများPathwayဆွေးနွေးဖိုရမ်ဘလော့ဂ်ဆက်သွယ်ရန်
Week streakFOUNDATION0 badges
ဘာသာစကား: မြန်မာ (Burmese)
  • English
  • Nederlands
  • Français
  • Deutsch
  • Lea faka-Tonga
  • Te reo Māori
  • မြန်မာ (Burmese)
အသိုင်းအဝိုင်းကို မေးမြန်းရန်

Your PaT Pathway

0/46
Foundation
0/43
Practitioner
0/37
Advanced
0/20
Super User
  • LMS တုံ့ပြန်အကြံပြုချက်များ- သင်ယူသူများ၏ အဆင့်သတ်မှတ်ချက်များနှင့် မှတ်ချက်များ
  • LMS မက်ထရစ်များ - တိုင်းတာ၍မရလျှင် စီမံခန့်ခွဲ၍မရပါ
  • PaT Lite သင်တန်းပို့တယ်အတွက် ကမ်ပိန်းတစ်ခု ဖန်တီးနည်း
  • PaT လုပ်ငန်းယူနစ် နမူနာပုံစံ ခြုံငုံသုံးသပ်ချက်
  • SD လုပ်ငန်းစဉ်များ - လုပ်ငန်းစဉ်ဆက်တင်များ
  • SD အလုပ်စဉ်များ - အဆင့်ဆင့်တင်သွင်းခြင်း
  • ကုမ္ပဏီဖွဲ့စည်းပုံ- ဆိုက်တစ်ခု သို့မဟုတ် နိုင်ငံတစ်ခုအတွက် မော်ဂျူးများ
  • ကုမ္ပဏီဖွဲ့စည်းပုံ- ဌာနများ၊ အလုပ်ရာထူးများနှင့် တာဝန်များ
  • ကုမ္ပဏီဖွဲ့စည်းပုံ- ဖောက်သည်ကုမ္ပဏီများ
  • ကုမ္ပဏီဖွဲ့စည်းပုံ- အသုံးပြုသူအသစ် ထည့်ခြင်း
  • ကုမ္ပဏီဖွဲ့စည်းပုံ: လုပ်ငန်းစဉ်အမျိုးအစားများ
  • ချိတ်ဆက်မှုများ - PaT ကို Microsoft 365 နှင့် ချိတ်ဆက်ခြင်း
  • စနစ်ဖွဲ့စည်းပုံ- ကုမ္ပဏီဆက်တင်များ
  • စနစ်လုပ်ဆောင်မှုများ- အဆင့်မြှင့်တင်ဆောင်ရွက်မှုများ၊ အကောင့်ဝင်မှုများ၊ အီးမေးလ်များနှင့် အခြားအရာများ
  • ပြန်လည်အသိအမှတ်ပြုခြင်းနှင့် အဆင့်မြှင့်တင်အသိပေးမှုများကို အချိန်ခွဲစီမံခြင်း
  • ဖောင်များ - API ပေါင်းစည်းမှု
  • ရှိပြီးသား Bulletin Board ပို့စ်ကို တည်းဖြတ်နည်း
  • သင့် SD Map ကို စတင်တည်ဆောက်နည်း
  • အဖွဲ့အစည်းဖွဲ့စည်းပုံဇယား
  • အသုံးပြုသူများကို စီမံခန့်ခွဲရန်
  • SD တစ်ခုကို မိဘအသစ်တစ်ခုထံ သတ်မှတ်ခြင်း
  • BFF သို့ အီးမေးလ်ပို့ခြင်း
  • C2E ပူးတွဲဖိုင်များ
  • Inline ချတ်များ
  • LMS ဗိသုကာပုံစံ
  • PaT AI
  • PaT က အသုံးမပြုတော့သော အသုံးပြုသူများကို စီမံခန့်ခွဲပုံ
  • SD တွင် တိုက်ရိုက်ဒေတာ (ဂရပ်များနှင့် စာရင်းဇယားများ) ထည့်သွင်းခြင်း
  • SD ပိုင်ရှင်၏ လုပ်ဆောင်ချက်များ
  • SD ဖောင်တုံ့ပြန်ချက်များ — ဖောင်တုံ့ပြန်ချက်များကို ရှာဖွေခြင်းနှင့် ထုတ်ယူခြင်း
  • SD လုပ်ငန်းတာဝန် နံရံမြင်ကွင်း
  • SD သို့ Chat
  • SD အစိတ်အပိုင်းများကို အမျိုးအစားခွဲခြားခြင်း
  • SD အဖွဲ့ဝင်များနှင့် ပြင်ပအသုံးပြုသူများအကြား SD ချတ်များ အလုပ်လုပ်ပုံ
  • SDs ကို အသုံးပြု၍ အစည်းအဝေးများ ကျင်းပခြင်း
  • SDs များကို Dock ထဲသို့ ထည့်ခြင်းနှင့် ပုံများကို အပ်ဒိတ်လုပ်ခြင်း
  • SDs များကို သိမ်းဆည်းခြင်းနှင့် ပြန်လည်ရယူခြင်း
  • SDs များအတွင်း SDs များကို ထည့်သွင်းခြင်း
  • ကျန်းမာရေးနှင့် ဘေးကင်းလုံခြုံရေး ပုံစံနမူနာများ
  • ချက်တင် သတိပေးချက်
  • ချက်တင်မှ လုပ်ဆောင်ရန်တာဝန်၊ ထို့နောက် ပရောဂျက်သို့
  • ချက်မှ အီးမေးလ်သို့၊ အီးမေးလ်မှ ချက်သို့
  • ချတ်များကို အောက်ခြေဘားတွင် ချိတ်ထားခြင်း
  • တက်ရောက်သူများကို ဖိတ်ကြားရန်
  • ထပ်ခါတလဲလဲ လုပ်ဆောင်ရမည့် တာဝန်များ- ဖန်တီးခြင်းနှင့် တည်းဖြတ်ခြင်း
  • ထိတွေ့ပါဝင်မှုကို ခြေရာခံခြင်း
  • နားလည်မှု စစ်ဆေးခြင်းများ
  • ပေါ်ထွက်စကားပြောခန်း လုပ်ဆောင်ချက်
  • ဖောက်သည်တစ်ဦးချင်းအလိုက် သတ်မှတ်ထားသော သင်တန်းများ — လုပ်ဆောင်ပုံ
  • ဖောင်နံရံ
  • ဖောင်ပုံစံအမျိုးမျိုးကို အသုံးပြုပုံ
  • ဗီဒီယိုခန်းများ- ဧည့်သည်များ ဝင်ရောက်ခြင်းနှင့် အသံသွင်းခွင့် တောင်းခံခြင်း
  • ဘေးကင်းရေး လှည့်လည်စစ်ဆေးမှုများ
  • မည်သည့်ပုံကိုမဆို ကဏ္ဍခေါင်းစီးအိုင်ကွန်အဖြစ် ထည့်ပါ
  • မျက်နှာပြင်ကို မျှဝေပြီး မှတ်တမ်းတင်ပါ
  • လုပ်ငန်းတာဝန် ပြီးမြောက်မှုမှန်ကန်ရေး (Task Integrity) — ၎င်း၏အဓိပ္ပာယ်နှင့် ရမှတ်လျော့ကျရသည့်အကြောင်းရင်း
  • လုပ်ငန်းများစွာ
  • ဝန်ထမ်းတစ်ဦးအတွက် မော်ဂျူးတစ်ခုကို လော့ခ်ဖွင့်နည်း
  • သက်သေအထောက်အထားစစ်ဆေးမှုများ — တစ်ခုကို ပြီးမြောက်အောင်လုပ်ခြင်း
  • အချက်အလက် အိုင်ကွန်များ
  • အစီရင်ခံစာ သို့မဟုတ် အစည်းအဝေးမှတ်တမ်းအက်ပ်အဖြစ် SDs ကို အသုံးပြုခြင်း
  • အပိုင်းခေါင်းစီးများကို ရွှေ့ခြင်း
  • အီးမေးလ်မှ ချတ်သို့၊ ချတ်မှ အီးမေးလ်သို့ – PaT မသုံးသူများ
  • AI အကျဉ်းချုပ်- SD တစ်ခု၏ အကျဉ်းချုပ်
  • Chat Wall
  • MFA ဖြင့် ဝင်ရောက်ခြင်း- ဒုတိယအဆင့်
  • Outlook 2FA ပြဿနာ
  • PaT Chat အကြောင်း မိတ်ဆက်
  • PaT Lite သင်တန်းပေါ်တယ်ကို အသုံးပြုနည်း
  • PaT Wiki: အသုံးပြုပုံ လမ်းညွှန်
  • PaT Wiki៖ ရှာဖွေခြင်း၊ AI အဖြေကို ကြည့်ရှုခြင်းနှင့် အဆင့်သတ်မှတ်ခြင်း
  • PaT ကို အကောင်းဆုံးကြည့်ရှုနိုင်ရန် ဘရောက်ဇာဝင်းဒိုး အရွယ်အစားကို ချိန်ညှိနည်း
  • PaT မိုဘိုင်းအက်ပ် – ခြုံငုံသုံးသပ်ချက်
  • PaT ဝန်ဆောင်မှုအခြေအနေ: အခြေအနေစာမျက်နှာ၊ အခြေအနေသတိပေးချက်များနှင့် အခြေအနေအသိပေးချက်များ
  • PaT သို့ အကောင့်ဝင်ခြင်းနှင့် စကားဝှက် ပြန်လည်သတ်မှတ်ခြင်း
  • SD ပင်မစာမျက်နှာ၏ အသုံးဝင်သော လုပ်ဆောင်ချက်များ
  • SD အစိတ်အပိုင်းများ
  • SD အနှစ်ချုပ်
  • SD အသစ်တစ်ခု ဖန်တီးရန်
  • ကမ္ဘာလုံးဆိုင်ရာ ရှာဖွေမှု
  • ကျွန်ုပ်၏ ပရိုဖိုင်
  • ကြေညာချက်ဘုတ်တွင် ပို့စ်တစ်ခု တင်ရန်
  • ကုမ္ပဏီဝီကီ- သင့်ကုမ္ပဏီ၏ ကိုယ်ပိုင်မော်ဂျူးများကို ရှာဖွေခြင်း
  • ချက်တင်ကို လုပ်ငန်းတာဝန်အဖြစ် ပြောင်းရန်
  • စက်တစ်လုံးကို အသုံးပြုသူများစွာ အသုံးပြုသည့်အခါ လုံခြုံရေးအစီအမံများ
  • စာရွက်စာတမ်းသိမ်းဆည်းရာနေရာ- မျှဝေထားသောလင့်ခ်များ၊ သင့်ဖိုင်တွဲများနှင့် စိတ်ကြိုက်များ
  • တုံ့ပြန်ချက် မျှဝေရန်
  • ထုတ်ပြန်ချက်မှတ်တမ်း အသိပေးချက်များ - PaT ၏ ထုတ်ပြန်ချက်မှတ်တမ်းများ ပြောင်းလဲသည့်အခါ Sys Bot နှင့် စကားပြောခန်းတစ်ခု
  • ဖိုင်တွဲများ တင်ခြင်း
  • ဖိုင်များကို အစမ်းကြည့်ရှုခြင်း၊ ဒေါင်းလုဒ်လုပ်ခြင်းနှင့် မျှဝေခြင်း
  • မတော်တဆမှုများကို မှတ်တမ်းတင်ခြင်းနှင့် စီမံခန့်ခွဲခြင်း
  • မှတ်စုတစ်ခုကို လုပ်ငန်းတာဝန်အဖြစ် ပြောင်းလဲခြင်း
  • မှတ်စုများ
  • မိုဘိုင်းဖုန်းဖြင့် သင်ခန်းစာယူခြင်း
  • မိုဘိုင်းအက်ပ်တွင် ဗီဒီယိုခေါ်ဆိုမှုများ
  • မော်ဂျူးလေ့လာခြင်း - ဒက်စ်တော့
  • ယာဉ်မီးပွိုင့်ပုံစံ တိုးတက်မှုအခြေအနေ
  • ရုံးပြင်ပရှိနေခြင်း (OOF) ကို ဖွင့်ခြင်းနှင့် သင့် Task Wall ရှိ ပြက္ခဒိန်
  • လင့်ခ်များ ထည့်သွင်းခြင်း
  • လုပ်ငန်းတာဝန် စီမံခန့်ခွဲမှု
  • လုပ်ငန်းတာဝန် စီမံခန့်ခွဲမှုစနစ်
  • လုပ်ငန်းတာဝန် နံရံ
  • လုပ်ငန်းတာဝန်တစ်ခု ဖန်တီးရန်
  • လုပ်ဆောင်မှု အသိပေးချက်များ
  • သင့် PaT ဒက်စ်တော့ရှိ ချိတ်ဆက်မှုအိုင်ကွန်
  • သင်၏ PaT ထဲသို့ Outlook ကို ထည့်သွင်းနည်း
  • အကြောင်းအရာနှင့် ချိတ်ဆက်ထားသော ဆက်သွယ်ပြောဆိုမှု
  • အကူအညီရယူခြင်း- PaT Helpdesk
  • အခြားဘာသာစကားဖြင့် SD ကို ဖတ်ခြင်း
  • အန္တရာယ်များကို မှတ်တမ်းတင်ပြီး စီမံခန့်ခွဲခြင်း
  • အပိုင်းခေါင်းစဉ်များ
  • အဖွဲ့လိုက် စကားပြောခန်းများ
  • အဖွဲ့ဝင်များထည့်ပြီး ခွင့်ပြုချက်များ သတ်မှတ်ပါ
  • အမြန်မှတ်စုများ
  • အရေးကြီးသော Chrome Extension များ
  • အသစ်စတင်သူ PaT မိတ်ဆက် — ချတ်များနှင့် SDs
  • AI Playbook: နံပါတ်တူသော အခြားလက်မှတ်များကို စစ်ဆေးခြင်း
  • Calculated fields and calculated columns
  • Charts: options for lines, bars, axes and single values
  • Data sources: stage filters, dynamic dates and page values
  • Endpoint Manager: Endpoint များကို ရှာဖွေခြင်းနှင့် ကိုယ်ပိုင် UDF တည်ဆောက်ခြင်း
  • Form Builder: layout at each screen size
  • Form Builder: tools and shortcuts
  • Grids linked to a reporting SD: history charts and review comments
  • Grids: columns, formats and filters
  • Grids: conditional formatting
  • Grids: flatten and transpose data
  • Grids: rows, default values and editing rules
  • LMS ထဲသို့ SD ထည့်သွင်းနည်း
  • Module Publisher တွင် မော်ဂျူးများ တည်ဆောက်နည်း
  • Module Publisher အကြောင်းအရာ ရွေးချယ်စရာများ
  • PAR SD ကို အသုံးပြုပုံ
  • PaT SD နမူနာပုံစံများ၏ ခြုံငုံသုံးသပ်ချက်
  • PaT SD မြေပုံ တင်ပြချက်
  • PaT SD မြေပုံ အကျဉ်းချုပ်
  • Playbook Admin: Quality နှင့် Cost အမျိုးအစားတစ်ခုစီ၏ နောက်ကွယ်ရှိ ticket များ
  • Playbook Admin: သင့် shadow run ကို ပြန်လည်သုံးသပ်ရန် အသင့်ဖြစ်သောအခါ
  • Playbook တည်းဖြတ်စနစ်- portal lookup အဆင့်တစ်ခု ထည့်ခြင်း
  • Playbook တည်းဖြတ်သူ- အော်ဒါတစ်ခုကို ပယ်ဖျက်သည့် အဆင့်တစ်ခု ထည့်ခြင်း
  • Pure Forms
  • Rich text, file uploads and speech to text
  • SD ထဲသို့ ဖောင်အစိတ်အပိုင်းများ ထည့်သွင်းနည်း
  • SD ဒက်ရှ်ဘုတ် - ဒက်ရှ်ဘုတ်တစ်ခု တည်ဆောက်ခြင်း
  • SD နမူနာပုံစံ အကူအညီပေးလုပ်ဆောင်ချက်များ
  • SD ဖောင်များ
  • SD လုံခြုံရေးဆက်တင်များ
  • SDs ကို LMS စာရွက်စာတမ်းအဖြစ် အသုံးပြုခြင်း
  • Stacked views, flip cards, tabs and stages
  • UDF ကို ပြင်ဆင်သတ်မှတ်ခြင်း- စစ်ထုတ်မှုများ၊ အုပ်စုဖွဲ့ခြင်းနှင့် အဆုံးမှတ်အသေးစိတ်များ
  • UDF တစ်ခုကို စီစဉ်သတ်မှတ်ခြင်း- ကော်လံများနှင့် တွက်ချက်ထားသော ကော်လံများ
  • ကန့်သတ်ထိန်းချုပ်ခြင်း
  • ချတ်များကို စီမံခန့်ခွဲခြင်း — ကျွမ်းကျင်သူများအတွက် အကြံပြုချက်များ
  • တိုက်ရိုက် H&S အစီရင်ခံခြင်း
  • ဖောက်သည်တစ်ဦးချင်းအလိုက် သင်တန်းပြင်ဆင်ခြင်း
  • ဖောင်ခလုတ်များ၊ PDF များနှင့် တင်သွင်းပြီးနောက် ဖြစ်ပျက်မည့်အရာများ
  • ဖောင်စမ်းသပ်မုဒ်
  • ဖောင်တည်ဆောက်ရေးကိရိယာ- အကွက်အမျိုးအစားများ
  • ဖောင်များ - ဒေတာထုတ်ယူခြင်း (AI ဖောင်တည်ဆောက်ရေးကိရိယာ)
  • ဖောင်အကွက်များ- မူရင်းတန်ဖိုးများ၊ ဖတ်ရန်သာ သတ်မှတ်ချက်နှင့် အခြားဆက်တင်များ
  • မန်နေဂျာကောင်းတစ်ဦးမှ ထူးချွန်သောမန်နေဂျာတစ်ဦးဖြစ်လာရန် Chat to SD ကို အသုံးပြုခြင်း
  • မန်နေဂျာများက မိမိတို့၏ဝန်ထမ်းများအတွက် OOF ကို မည်သို့ဖွင့်ပေးနိုင်သနည်း
  • မဟာဗျူဟာစနစ်
  • မော်ဂျူး စာမေးပွဲများ ဖန်တီးနည်း
  • မော်ဂျူး စီမံခန့်ခွဲသူ- မော်ဂျူးများကို ရှာဖွေခြင်းနှင့် စီမံခန့်ခွဲခြင်း
  • မော်ဂျူးနားလည်မှု စစ်ဆေးမှုများ ဖန်တီးနည်း
  • မော်ဂျူးပြီးဆုံးကြောင်း အသိပေးချက် စနစ်ထည့်သွင်းခြင်း
  • မော်ဂျူးအထောက်အထားစစ်ဆေးမှုများ ဖန်တီးနည်း
  • လိုအပ်သော အကွက်များ၊ အတည်ပြုစစ်ဆေးခြင်းနှင့် ကွန်တိန်နာများ
  • လုပ်ငန်းမဟာဗျူဟာ ပုံစံကို ကျွမ်းကျင်စွာ အသုံးပြုခြင်း
  • လူတိုင်း အသုံးပြုနိုင်ရန် ဖောင်ပုံစံများကို မည်သို့ အသက်ဝင်စေမည်နည်း
  • အခြေအနေအလိုက် ဖော်မတ်ချခြင်း
  • အစီရင်ခံစာစနစ်တစ်ခု တည်ဆောက်ခြင်း
  • အလိုအလျောက် အဆင့်ဆင့်တင်ပြခြင်း
  • PaT Lite: သင်နားလည်ထားရန်လိုအပ်သည့် PaT ၏ အဓိကအချက်များ
  • PaT ဆိုတာ ဘာလဲ၊ ဘာကြောင့် အရေးကြီးတာလဲ
  • PaT Lite: စကားပြောခြင်းမှ လုပ်ငန်းတာဝန်သို့
  • PaT Lite: Strategy Documents ကို မိတ်ဆက်ခြင်း
  • PaT Lite: အဓိက ဒဿန — စံနှုန်းများနှင့် နည်းဗျူဟာအကောင်အထည်ဖော်မှု
  • PaT Lite: သင်နှင့်အတူ စဉ်းစားပေးသည့် ဉာဏ်ရည်မြင့် ကိရိယာများ
  • PaT Lite: စီးပွားရေးလုပ်ငန်းများ၏ အနာဂတ်သည် ယဉ်ကျေးမှုဖြစ်သည်
  • လုံခြုံရေး
  • ပေါင်းစည်းချိတ်ဆက်မှုများ
0/46
Foundation
0/43
Practitioner
0/37
Advanced
0/20
Super User
  1. မှတ်တမ်းစာရွက်စာတမ်းများ
  2. အဆင့်မြင့်
  3. Charts: options for lines, bars, axes and single values

ဤစာမျက်နှာကို ဘာသာပြန်ရသေးခြင်း မရှိသဖြင့် အင်္ဂလိပ်ဘာသာဖြင့် ပြသထားပါသည်။

Charts: options for lines, bars, axes and single values

Summary This lesson is for the people who build dashboards in PaT, and for anyone who reads them. It covers the newer chart options: separating overlapping lines, changing how a line chart draws its…

Check yourself

သင်၏ PaT အကောင့်ဝင်ခြင်းကို စစ်ဆေးနေသည်…

How To

ဤစာမျက်နှာတွင်
  • Opening a chart's options
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Line charts: separating overlapping lines
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Line charts: line width, dots, fill and end values
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Step 6
  • Step 7
  • Step 8
  • Giving both Y axes the same scale
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Step 6
  • Setting the axis label fonts
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Making form submission dates bold on the X axis
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Sorting bars, and rounded corners on stacked bars
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Step 6
  • Reading the Chart Data Notes
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Seeing where a chart's data comes from
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Step 6
  • Step 7
  • Step 8
  • Step 9
  • Drilling down by group from a table
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Step 6
  • Showing a single value as a card
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Step 6
  • Step 7
  • Step 8
  • Step 9
  • Step 10
  • Step 11
  • Adding a trend line and a change figure to a card
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Step 6
  • Step 7
  • Step 8
  • Purpose / Intent of the Module
  • Header One

Summary This lesson is for the people who build dashboards in PaT, and for anyone who reads them. It covers the newer chart options: separating overlapping lines, changing how a line chart draws its lines, giving both Y axes the same scale, setting the font and size of the axis labels, showing form submission dates in bold on the X axis, sorting stacked bars, the Chart Data Notes, the Source Details window, drilling down by group from a table, and showing a single value as a card, with a trend line and a change figure. To add a chart and connect it to its data first, see the lesson SD Dashboard: building a dashboard.

Opening a chart's options

Step 1

The person who builds the dashboard sets these options in SD Dashboard. Open the SD, click its Advanced tab, then in the menu on the left, under PaT BI, click SD Dashboard.

Step 2

On the canvas, click the chart's edit button (the pencil, at its top right). The Edit form field window opens, and its title names the chart, for example Edit form field Line Chart.

Step 3

The options in this lesson are on the General tab, below the X Axis Column and the grid of the chart's data. Each row of that grid is one series (one line, or one set of bars), with columns such as Y Axis, Data Reference, Color and Order.

Step 4

To keep your changes, click the green Save and Close button at the bottom right of the window. Its label ends with the same name as the window's title, such as Save and Close Line Chart. The red Close, at the top right, leaves the chart as it was.

Line charts: separating overlapping lines

Step 1

On a Line Chart, Separate Overlapping Lines is on the General tab, just below Link Y-Axis. It is on by default, also for line charts made before the option existed.

Step 2

When it is on, lines with the same or very close values are drawn a few pixels apart, so every line stays visible.

Step 3

Only lines that overlap somewhere are moved, and a moved line moves along its whole length. Lines on the left Y axis and lines on the right Y axis are compared separately.

Step 4

The values do not change. Pointing at a line still shows its real values, and a small gap between two lines does not mean their values differ.

Step 5

To draw every line exactly on its values, switch Separate Overlapping Lines off, then click the green Save and Close button.

Line charts: line width, dots, fill and end values

Step 1

A Line Chart has six more settings for its lines on the General tab, just below Separate Overlapping Lines. Each one leaves the chart as before until you set it. A Multi Axis Line Chart and a Mixed Type Chart do not have them.

Step 2

Line width (1 to 4 px) sets how thick the lines are drawn. Type a number of pixels from 1 to 4, such as 2.5. Left empty, the lines keep their usual width.

Step 3

Dots on the lines sets which points get a dot: On every point (as before), On the last point only, or None.

Step 4

Soft fill under the lines shades the area under a line in a pale tint of its colour: None (as before), Under the first line, or Under every line. The fill is not listed in the legend or the tooltip.

Step 5

Switch on Value at the end of each line to put a dot on each line's last point, with its value beside it. Whole numbers show as they are, and other values are rounded to one decimal place.

Step 6

Text after the end value (e.g. %) adds a short text after each end value, for example % to show 63%. It shows only while Value at the end of each line is on.

Step 7

Switch on Short lines in the legend to mark each line in the legend with a short plain line.

Step 8

Click the green Save and Close button. The chart then draws its lines with the settings you chose.

Giving both Y axes the same scale

Step 1

Link Y-Axis is on the General tab of a Line Chart, Bar Chart, Stacked Bar Chart, Multi Axis Line Chart, Mixed Type Chart and Vertical Combined Chart, below the Y axis Max Value boxes (and the Min Value boxes, where the chart has them).

Step 2

It matters when the chart has a right Y axis, that is when at least one row of the data grid has Right in its Y Axis column.

Step 3

Switch Link Y-Axis on to give the left and right Y axes the same scale, with the same lowest and highest values, so the two sides can be compared at a glance. With the Max Value and Min Value boxes empty, the scale fits the values on both sides.

Step 4

While Link Y-Axis is on, a number you type in a Max Value or Min Value box still counts. If only one side has a number for an end, both axes use it there. For example, with 90 in Left Y Axis Min Value and Right Y Axis Min Value empty, both axes start at 90.

Step 5

If both sides have a number for the same end, both axes use the lower Min Value, or the higher Max Value. A value past a number you set still shows: its axis stretches to reach it.

Step 6

On a Vertical Combined Chart the value axes run along the bottom and the top. Its Left Y Axis boxes set the bottom axis, and its Right Y Axis boxes the top one. Link Y-Axis gives the bottom and top axes the same scale, as it does the left and right ones.

Setting the axis label fonts

Step 1

On a Line Chart, Bar Chart, Stacked Bar Chart, Multi Axis Line Chart, Mixed Type Chart and Vertical Combined Chart, the General tab has X Axis Font Family and X Axis Font Size (px), and, below Show Y Axis, Y Axis Font Family and Y Axis Font Size (px).

Step 2

Each Font Family list offers Inherit (page default), Arial, Helvetica, Roboto, Georgia, Times New Roman, Courier New and Monospace. Type each size in pixels.

Step 3

Click the green Save and Close button. The chart draws its X axis labels, and its Y axis labels, in the chosen font and size. A chart with two Y axes uses the Y axis font on both.

Step 4

For a chart with no font chosen, the window shows Inherit (page default) and empty sizes, and the chart looks as it did before. When you open the window again, it shows the fonts you saved.

Step 5

A Pie Chart has no axes, so its window has no axis font settings.

Making form submission dates bold on the X axis

Step 1

Bold X-Axis Labels for Form Submissions is on the General tab of a Line Chart, Bar Chart, Stacked Bar Chart, Multi Axis Line Chart and Mixed Type Chart, just above X Axis Font Family.

Step 2

It works when the chart's data source fills in the missing days, with Fill gaps in days - Add missing days as the Gap Filling Strategy of its date column, in Configure Data Source. Without that, the switch changes nothing.

Step 3

Switch it on, then click the green Save and Close button. On the X axis, each date that came from a form submission is shown in bold, and the days that were added stay in normal type.

Step 4

The dates keep the chart's Date Format, bold or not, for example 03/11/2026 with DD/MM/YYYY.

Sorting bars, and rounded corners on stacked bars

Step 1

On a Stacked Bar Chart, Element Sort Order sets the order of the parts in each bar. It is on the General tab, just below the data grid.

Step 2

By Minimum Value (Default) puts the series with the lowest value first, and By Maximum Value puts the series with the highest value first. Alphabetical (A-Z) sorts the series by name.

Step 3

Data Settings Order (Grid Above) keeps the order of the rows in the data grid. Manual (Use Order Column from Grid Above) follows the numbers in the grid's Order column, lowest first.

Step 4

The first series is drawn at the base of each bar, next to the X axis, and comes first in the legend.

Step 5

On a Bar Chart or a Line Chart, the Order column sets the order by itself: the series are drawn, and listed in the legend, from the lowest Order number up. Each new row of the grid gets the next number.

Step 6

Stacked bars have rounded corners at their outer end: at the top of a stack above zero, and at the bottom of a stack below zero. There is nothing to set, and the rounding stays on the outer part even when the part above it is zero.

Reading the Chart Data Notes

Step 1

While you build the dashboard, a grey box headed Chart Data Notes shows above each chart on the canvas. Its notes say what PaT found in the chart's data, for example which numeric fields it uses for the Y axis.

Step 2

Notes longer than about 40 characters are cut short and end in three dots. View full notes shows under the list whenever a note is cut short.

Step 3

Click View full notes. The Chart Data Notes pop-up opens and shows every note in full.

Step 4

Click Close, or the cross at the top right, to go back. Clicking outside the pop-up also closes it.

Step 5

People viewing the finished dashboard do not see the Chart Data Notes.

Seeing where a chart's data comes from

Step 1

At the top right of a chart, beside its title, click the three dots (More options). The menu includes Export as SVG, Export as PNG and Source Details.

Step 2

Source Details is in the menu when the chart's endpoint sends details of its source. Anyone viewing the dashboard can open it, as well as the person who builds it.

Step 3

Click Source Details. The Data Source Details window opens.

Step 4

Source Name gives the name of the endpoint. To copy the name, click the copy icon beside it.

Step 5

Below it are the endpoint's Description, when it has one, and its Connection Type, such as Form Responses, API, Database or User Defined.

Step 6

Applied Filters lists each filter on the data, with its field, its operator and its value, then a one-line Summary. With no filters, it says No filters applied.

Step 7

If Open in Data Source Manager shows beside Close, at the bottom of the window, click it to look the source up in the Data Source Manager. It opens in a new browser tab.

Step 8

Click Close to go back to the chart.

Step 9

The three dots show only while the chart's title shows. When Hide Title is on in the chart's settings, they are hidden too.

Drilling down by group from a table

Step 1

A Table grid on a dashboard can open a history graph from its cells. To set it up, the person who builds the dashboard clicks the Table grid's edit button (the pencil), opens the Advanced tab and chooses the reporting SD in Reporting SD?.

Step 2

Reporting SD? is for a Table grid whose Data Mode is Endpoint pulled from a data source, with an endpoint whose data comes from Form Responses. It shows on the Advanced tab only for such a grid.

Step 3

People viewing the dashboard can point at a cell's value to see View history for, followed by the column's name. Clicking the value opens a history pop-up titled with the column's name, with a graph of that answer's history.

Step 4

The graph drills down by group when the table's UDF keeps only the latest response for each group, for example one row per site. It then shows the history of the row's group, for example one site, instead of the history of the row's contact.

Step 5

To set a Form Responses UDF up that way, open its Query Builder tab. Under Advance Settings, in Last Response by Fields, switch on Only Latest Response Per Field Combination, then pick the group in Group By Fields.

Step 6

The graph uses the first field in Group By Fields. With the switch off, the graph shows the history of the row's contact. For more on UDFs, see the lesson Configuring a UDF: filters, grouping and endpoint details.

Showing a single value as a card

Step 1

Single Value Display, in the Reporting group of the Controls tab, shows one figure from an endpoint, such as a total, with its label. Drag it onto the canvas, then click its edit button (the pencil).

Step 2

On the General tab, set Data Mode to Endpoint pulled from a data source, then choose the Endpoint. Then pick which of the endpoint's columns holds the figure, and which holds its label.

Step 3

Use First or Last row in endpoint sets which row the figure comes from: First or Last.

Step 4

Display Format sets the look: Simple, Card, Highlight or Inline. Card wraps the figure in a card, Highlight gives it a solid background colour and bold text, and Inline styles it like a pill.

Step 5

Display Type sets how the value is written: Text, Number, Currency, Percentage or Date. Currency adds a dollar sign, and Percentage adds a percent sign.

Step 6

Layout sets what shows: Label and Value, Value Only, Icon Label and Value, or Icon and Value. For an icon, choose it, its size and its colour under Icon Settings.

Step 7

Fill Colour sets the background of a Highlight card, and tints an Inline one. It does not change Simple or Card.

Step 8

If the value is a date, type its format in Date Format for Value (If value is detected as date), for example YYYY-MM-DD. Left empty, it uses DD/MM/YYYY. Date Format for Label (If label is detected as date) does the same for the label. A plain number, such as 1250, is never taken for a date.

Step 9

Figure size makes the figure Normal, Large or Hero (very large). It has no effect when Display Format is Inline.

Step 10

Switch on Icon in a soft circle to show the icon on a pale round background. It needs a Layout that shows an icon.

Step 11

Click the green Save and Close Single Value Display button, at the bottom right of the window, to keep the changes.

Adding a trend line and a change figure to a card

Step 1

A Single Value Display can show a small trend line and a change figure from its endpoint, when its Display Format is Simple, Card or Highlight. Their settings are on the General tab, just below Endpoint value column. Each one is off until you set it.

Step 2

In Trend line column, choose the endpoint's column that holds recent values. The card draws them as a small line under the figure, with a dot on the last value.

Step 3

The Trend line column can hold a list in the row the card shows, oldest first, such as 61,63,,68. An empty entry leaves a gap in the line. If the column holds a single number, the card uses that column down every row instead, one row for each period.

Step 4

Trend line size makes the line Small or Large. Trend line dot colour sets the colour of the dot on the last value.

Step 5

In Change column, choose the column that holds the change since the last period, a number such as 4 or -23. The card shows it with an arrow that points up for a rise and down for a fall. Change unit (e.g. pts) adds a word after the number, such as pts.

Step 6

A change is good when it goes sets which way is good: Up, Down or Neither (always grey). A good change shows in green and a bad one in red. Unless you change it, a rise is good.

Step 7

Show the change places the change As a line under the figure, or As a pill beside the figure.

Step 8

Click the green Save and Close Single Value Display button, at the bottom right of the window, to keep the changes.

Purpose / Intent of the Module

A brief description of what this module is about

Header One

Ready? Back to the quiz

Rate this page

Checking your PaT sign-in…

ယခင်Calculated fields and calculated columnsနောက်တစ်ခု Data sources: stage filters, dynamic dates and page values

ဤစာမျက်နှာတွင်

  • Opening a chart's options
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Line charts: separating overlapping lines
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Line charts: line width, dots, fill and end values
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Step 6
  • Step 7
  • Step 8
  • Giving both Y axes the same scale
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Step 6
  • Setting the axis label fonts
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Making form submission dates bold on the X axis
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Sorting bars, and rounded corners on stacked bars
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Step 6
  • Reading the Chart Data Notes
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Seeing where a chart's data comes from
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Step 6
  • Step 7
  • Step 8
  • Step 9
  • Drilling down by group from a table
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Step 6
  • Showing a single value as a card
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Step 6
  • Step 7
  • Step 8
  • Step 9
  • Step 10
  • Step 11
  • Adding a trend line and a change figure to a card
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Step 6
  • Step 7
  • Step 8
  • Purpose / Intent of the Module
  • Header One
PPaT Wiki

People and Tasks အတွက် စာရွက်စာတမ်းများ၊ ဗဟုသုတအခြေခံနှင့် အသိုင်းအဝိုင်း ပံ့ပိုးမှု။

စာရွက်စာတမ်းများ

  • စတင်အသုံးပြုခြင်း
  • အခြေခံသဘောတရားများ
  • ပေါင်းစည်းချိတ်ဆက်မှုများ
  • API ကိုးကားချက် မကြာမီ လာမည်

ပံ့ပိုးကူညီမှု

  • ဗဟုသုတအခြေခံ
  • ဗားရှင်းထုတ်ပြန်ချက်များ
  • အသိုင်းအဝိုင်း ဖိုရမ်
  • ကျွန်ုပ်တို့ထံ ဆက်သွယ်ရန်
  • ဝန်ဆောင်မှု အခြေအနေ

ကုမ္ပဏီ

  • PaT
  • ဘလော့ဂ်
  • စည်းမျဉ်းစည်းကမ်းများ
  • ကိုယ်ရေးအချက်အလက် လုံခြုံရေး

© People and Tasks။ မူပိုင်ခွင့်အားလုံးကို ရယူထားသည်။