Form buttons, PDFs and what happens after submit
Summary This lesson is for people who build forms in the Form Builder, and for anyone who fills them in. Form builders learn to change the words, size and place of a form's buttons, add a Reset…
Check yourself
Checking your PaT sign-in…
How To
On this page
- Changing the words, size and place of the Submit button
- Step 1
- Step 2
- Step 3
- Step 4
- Step 5
- Step 6
- Step 7
- Step 8
- Changing the words on a button element
- Step 1
- Step 2
- Step 3
- Step 4
- Step 5
- Step 6
- Step 7
- Adding a Reset Button so people can start over
- Step 1
- Step 2
- Step 3
- Step 4
- Step 5
- Sending people to another web page after they submit
- Step 1
- Step 2
- Step 3
- Step 4
- Step 5
- Step 6
- Step 7
- Step 8
- Step 9
- Step 10
- Step 11
- Showing a form inside another web page
- Step 1
- Step 2
- Step 3
- Step 4
- Downloading a form as a PDF
- Step 1
- Step 2
- Step 3
- Step 4
- Step 5
- Step 6
- Step 7
- What the PDF shows
- Step 1
- Step 2
- Step 3
- Finding the SD a form or dashboard comes from
- Step 1
- Step 2
- Step 3
- Step 4
- Purpose / Intent of the Module
- Header One
Summary This lesson is for people who build forms in the Form Builder, and for anyone who fills them in. Form builders learn to change the words, size and place of a form's buttons, add a Reset Button so people can start over, and send people on to another web page once they submit, including from a form shown inside another web page. People filling in a form learn to download it as a PDF with their answers filled in, and to find the SD the form comes from.
Changing the words, size and place of the Submit button
Step 1
This part is for the person who builds the form. Open the form in the SD Form Builder, then click Settings, in the bar across the top of the Form Builder, towards its right end. Settings works once the Canvas has at least one field.
Step 2
The Settings window opens. Its settings apply to the whole form, not to one field. Close, at its top right, shuts the window without saving.
Step 3
In Submit button text, type the words for the Submit button at the bottom of the form, for example Send my answers. A new form starts with Submit.
Step 4
In Submit button size, choose Small, Medium or Large.
Step 5
In Submit button position, choose Left, Center or Right, to set where the button sits across the bottom of the form.
Step 6
Under Spacing, Spacing on the top and Spacing on the bottom set the space above and below the Submit button.
Step 7
Click Save at the bottom of the Settings window, and the window closes. If the Canvas heading then shows (Unsaved changes) in red, click Save Form Now, at its right, to save the form.
Step 8
If Submit button text is left empty, the form shows no Submit button at the bottom. Leave it empty only when the form has its own Submit Button element, so people can still send their answers.
Changing the words on a button element
Step 1
Two buttons in the Custom control are elements you drag onto the Canvas: Submit Button, shown in the list as a Submit Form button, and Reset Button. Each one has its own words, set in its edit window rather than in Settings.
Step 2
To change a button element's words, point at it on the Canvas and click its edit button (the pencil), in the row of small buttons at its top right. The Edit form field window opens.
Step 3
Under Button, type the new words in Button text. A Submit Button element starts with Submit Form.
Step 4
In Button icon, choose a small picture to show before the words. Type part of an icon's name, such as Send or Check, to search the list.
Step 5
Click the green save and close button at the bottom right of the window. The button on the Canvas shows its new words.
Step 6
A Button Select element, in the Logical control, has a Yes button and a No button. To rename them, type the new words in Left button text and Right button text, in its edit window.
Step 7
Show and hide rules still treat the answers to a renamed Button Select as Yes and No, so set those rules with Yes and No.
Adding a Reset Button so people can start over
Step 1
This part is for the person who builds the form. On the left of the Form Builder, open the drop-down list under Controls and choose Custom.
Step 2
Drag Reset Button from the list onto the Canvas. If it is not in the list, click Next under the list to see the next page of elements.
Step 3
A grey Start Over button appears on the Canvas, with a curved arrow that turns back. To change its words or its icon, use Button text and Button icon in its edit window.
Step 4
When the person filling in the form clicks Start Over, the form goes back to its start and the answers in it are cleared, as when the page is reloaded. On a Standard Form or Flip Card link, the next submit is saved as a new response. On a multi-stage form filled in one stage at a time, answers saved at an earlier stage stay.
Step 5
If the form has more than one view, Start Over goes back to the first view. On a Flip Card form, which opens with an introduction card, it goes back to that card.
Sending people to another web page after they submit
Step 1
This part is for the person who builds the form. Click Settings, at the top of the Form Builder, and scroll down the Settings window to Post-Submit Redirect.
Step 2
Switch on Enable Post-Submit Redirect.
Step 3
In Redirect URL, type or paste the full web address of the page to open, starting with https://, such as a thank-you page on your own website.
Step 4
In Redirect Target, choose where that page opens: Redirect entire page (recommended for iframes), Open in new tab, Redirect parent frame, or Redirect current frame only.
Step 5
On a new form, Redirect Target reads Redirect entire page (the default). Left like that, the form acts as Redirect entire page (recommended for iframes): it replaces the form with the new page, in the same browser tab.
Step 6
Open in new tab opens the new page in a new browser tab, and the form stays open in its own tab.
Step 7
Some social media apps open links in a browser of their own. Inside one of those, Open in new tab opens the new page in the same tab instead. The same happens if the browser blocks the new tab.
Step 8
Click Save at the bottom of the Settings window. If the Canvas heading then shows (Unsaved changes) in red, click Save Form Now, at its right, to save the form.
Step 9
When the person filling in the form clicks Submit and the answers are saved, the new page opens about one and a half seconds later. With Open in new tab, it opens as soon as the answers are saved. If the answers cannot be saved, the new page does not open: an error message shows, and Submit can be clicked again.
Step 10
If the link that opened the form carries campaign tracking codes, such as utm_source, utm_campaign or gclid, PaT passes them on to the Redirect URL, so the next page can count the visit. A code the Redirect URL already has is not changed.
Step 11
While Enable Post-Submit Redirect is off, or Redirect URL is empty, the form does not send people anywhere after they submit.
Showing a form inside another web page
Step 1
A form can also sit inside another web page, such as a page of your own website. The person who looks after that website puts the form's link in a frame on the page, called an iframe.
Step 2
To get the form's link, click Share at the top of the Form Builder. The SD must be a template; otherwise the Share window asks you to convert the SD to a template. Click Activate Sharing if it shows, choose Single Submit or Multiple Submits, then click Copy Link. The lesson Pure Forms shows the Share window step by step.
Step 3
For a form inside a frame, choose Redirect entire page (recommended for iframes) in Redirect Target, under Post-Submit Redirect in Settings. After a submit, the whole web page moves on to the Redirect URL, not only the frame.
Step 4
Redirect parent frame moves on the page that holds the frame. Redirect current frame only shows the new page inside the frame, and the rest of the web page stays as it was.
Downloading a form as a PDF
Step 1
This part is for anyone filling in a form opened from its link. At the top right of the form is a small square button with a download arrow. Point at it and it reads Export Form to PDF.
Step 2
Fill in the form as far as you want, then click the download button. While PaT makes the PDF, a spinning circle takes the place of the arrow.
Step 3
When the PDF is ready, it downloads to your computer or phone, or opens in a new browser tab.
Step 4
Download the PDF before you submit the form, while your answers are still on screen.
Step 5
You need to be signed in to PaT to make the PDF. Someone who is not signed in to PaT gets a message instead, which reads PDF export failed: Sign in to PaT to download this form as a PDF.
Step 6
If the PDF cannot be made for another reason, the PDF export failed message says why. For a very large form, it suggests your browser's own Print option instead.
Step 7
The download button is only on a form opened from its link. The Canvas of the Form Builder and its Preview (Emulated Size) window do not have it.
What the PDF shows
Step 1
The PDF shows the form as it looks on screen, with the answers filled in so far, such as typed text, the choices picked in drop-down lists, and ticked boxes and round buttons. Open the PDF to check that every answer you need is in it.
Step 2
On a Standard Form link, collapsed field groups are opened while PaT makes the PDF, so that their questions and answers go into it. On screen, they close again afterwards.
Step 3
On a Flip Card form, which opens with an introduction card, open any collapsed field groups yourself before you download, so their answers are in the PDF.
Finding the SD a form or dashboard comes from
Step 1
At the bottom of a form opened from its link, and at the bottom of a dashboard, a small grey line reads From SD: followed by the name of the SD the form or dashboard belongs to.
Step 2
The SD's name can differ from the form's title. When the form or dashboard needs a change, open the SD named in the line: that is where it is built.
Step 3
The line appears by itself: there is nothing to switch on. It is not shown in the Form Builder, or on paper when you print the page from your browser.
Step 4
If PaT cannot match the form or dashboard to an SD, the line does not appear.
Purpose / Intent of the Module
A brief description of what this module is about
Header One
Rate this page
Checking your PaT sign-in…