PPaT Wiki
DocumentationPathwayForumBlogContact
Week streakFOUNDATION0 badge
Langue: Français
  • English
  • Nederlands
  • Français
  • Deutsch
  • Lea faka-Tonga
  • Te reo Māori
  • မြန်မာ (Burmese)
Poser une question à la communauté

Your PaT Pathway

0/46
Foundation
0/43
Practitioner
0/37
Advanced
0/20
Super User
  • Activité du système : escalades, connexions, e-mails et plus encore
  • Comment configurer votre carte SD
  • Comment créer une campagne pour le portail de formation PaT Lite
  • Comment modifier une publication existante sur le tableau d’affichage
  • Commentaires LMS : évaluations et commentaires des apprenants
  • Configuration système : paramètres de l’entreprise
  • Connexions : relier PaT à Microsoft 365
  • Échelonner les recertifications et les escalades
  • Flux de travail SD - Soumissions multiples
  • Formulaires - Intégration API
  • Gérer les utilisateurs
  • Indicateurs LMS - Si vous ne pouvez pas le mesurer, vous ne pouvez pas le gérer
  • L’organigramme
  • Présentation du modèle d’unité opérationnelle PaT
  • SD Workflows - Paramètres des workflows
  • Structure de l’entreprise : ajouter un nouvel utilisateur
  • Structure de l’entreprise : catégories de processus
  • Structure de l’entreprise : départements, intitulés de poste et rôles
  • Structure de l’entreprise : entreprises clientes
  • Structure de l’entreprise : modules pour un site ou un pays
  • Ajouter une image quelconque comme icône d’en-tête de section
  • Animer des réunions avec les SDs
  • Architecture du LMS
  • Attribuer un SD à un nouveau parent
  • Audits de compréhension
  • Audits de preuves : en réaliser un
  • Catégorisation des éléments de SD
  • Classer et retrouver les SDs
  • Comment déverrouiller un module pour un membre du personnel
  • Comment fonctionnent les discussions SD avec les membres SD et les utilisateurs externes
  • Comment PaT gère les utilisateurs inactifs
  • Connexion des cartes SD et mise à jour des images
  • De l’e-mail au chat, puis du chat à l’e-mail – pour les utilisateurs qui ne sont pas sur PaT
  • Déplacer les en-têtes de section
  • Différentes utilisations des formulaires
  • Discussions en ligne
  • Discussions épinglées
  • Discuter pour créer un SD
  • Du chat à l’e-mail, puis de l’e-mail au chat
  • Du chat à la tâche, puis au projet
  • E-mail vers BFF
  • Fonctionnalité de détachement du chat
  • Fonctions du propriétaire de SD
  • Formation spécifique au client : fonctionnement
  • Icônes d’information
  • Intégrer des données en temps réel dans un SD (graphiques et feuilles de calcul)
  • Intégrer des SDs dans des SDs
  • Intégrité dans l’exécution des tâches : ce que c’est et pourquoi elle diminue
  • Inviter des participants
  • Modèles de santé et de sécurité
  • Mur des formulaires
  • Partager et enregistrer votre écran
  • PaT AI
  • Pièces jointes C2E
  • Rappel de chat
  • Salons vidéo : arrivée des invités et demandes d’enregistrement
  • SD Réponses au formulaire : trouver et exporter les réponses au formulaire
  • Suivre l’engagement
  • Tâches multiples
  • Tâches récurrentes : créer et modifier
  • Utiliser les SDs comme application de rapports ou de comptes rendus de réunion
  • Visites de sécurité
  • Vue du tableau des tâches SD
  • Absence du bureau : activation et calendrier sur votre mur des tâches
  • Ajouter des membres et définir les autorisations
  • Alertes de notes de version : une conversation Sys Bot lorsque les notes de version de PaT changent
  • Appels vidéo sur l’application mobile
  • Capturer et gérer les dangers
  • Chat en tâche
  • Comment intégrer Outlook à votre PaT
  • Comment redimensionner votre navigateur pour afficher PaT de façon optimale
  • Comment utiliser le portail de formation PaT Lite
  • Communication contextuelle
  • Convertir une note en tâche
  • Créer un nouveau SD
  • Créer une tâche
  • Discussions de groupe
  • Éléments SD
  • Enregistrer et gérer les accidents
  • Espace de stockage des documents : liens partagés, vos dossiers et vos favoris
  • État du service PaT : page d’état, alertes et avis de service
  • Extensions Chrome essentielles
  • Fonctionnalités utiles de la page principale du SD
  • Formation aux modules - Mobile
  • Gestion des tâches
  • Importer des pièces jointes
  • Insérer des liens
  • L’icône de connexion sur votre bureau PaT
  • Lire un SD dans une autre langue
  • Mesures de sécurité pour plusieurs utilisateurs sur un appareil
  • Modules de formation - Ordinateur de bureau
  • Mon profil
  • Mur de discussion
  • Mur des tâches
  • Notes
  • Notes rapides
  • Notifications d’activité
  • Obtenir de l’aide : le centre d’assistance PaT
  • Partager des commentaires
  • PaT Mobile App – Présentation
  • PaT Wiki : effectuer une recherche, consulter la réponse de l’IA et l’évaluer
  • PaT Wiki : trouver votre chemin
  • Présentation de PaT pour les débutants – Chats et SDs
  • Présentation du chat PaT
  • Prévisualiser, télécharger et partager des fichiers
  • Problème d’authentification à deux facteurs dans Outlook
  • Progression avec feu tricolore
  • Publier un message sur le tableau d’affichage
  • Recherche globale
  • Résumé IA : un résumé rapide d’un SD
  • SD : présentation
  • Se connecter à PaT et réinitialiser votre mot de passe
  • Se connecter avec l’authentification multifacteur : la deuxième étape
  • Système de gestion des tâches
  • Titres de section
  • Wiki de votre entreprise : rechercher dans les modules de votre entreprise
  • Administration de Playbook : les tickets derrière chaque catégorie Qualité et coût
  • Administration des modules : trouver et gérer les modules
  • Administration des playbooks : lorsque votre exécution à blanc est prête à être examinée
  • Boutons de formulaire, PDF et suite à donner après l’envoi
  • Calculated fields and calculated columns
  • Champs de formulaire : valeurs par défaut, lecture seule et autres paramètres
  • Champs obligatoires, validation et conteneurs
  • Charts: options for lines, bars, axes and single values
  • Comment ajouter des éléments de formulaire à un SD
  • Comment créer des audits de preuves pour les modules
  • Comment créer des évaluations de compréhension de module
  • Comment créer des modules dans le Module Publisher
  • Comment créer des quiz de module
  • Comment intégrer un SD dans le LMS
  • Comment les responsables peuvent activer l’absence du bureau (OOF) pour les membres de leur équipe
  • Comment rendre les modèles de formulaire accessibles à tous
  • Comment utiliser le PAR SD
  • Configuration d’une UDF : filtres, regroupement et détails du point de terminaison
  • Configuration des notifications de fin de module
  • Configurer une UDF : colonnes et colonnes calculées
  • Créateur de formulaires : types de champs
  • Créer un système de reporting
  • Data sources: stage filters, dynamic dates and page values
  • Éditeur de playbook : ajouter une étape qui annule une commande
  • Éditeur de playbooks : ajouter une étape de consultation dans le portail
  • Escalade automatique
  • Fonctions d’aide des modèles SD
  • Form Builder: layout at each screen size
  • Form Builder: tools and shortcuts
  • Formation spécifique aux clients : configuration
  • Formulaires – Extraire des données (le générateur de formulaires IA)
  • Formulaires purs
  • Formulaires SD
  • Gestion des chats – conseils de pro
  • Gestionnaire de points de terminaison : rechercher des points de terminaison et créer votre propre UDF
  • Grids linked to a reporting SD: history charts and review comments
  • Grids: columns, formats and filters
  • Grids: conditional formatting
  • Grids: flatten and transpose data
  • Grids: rows, default values and editing rules
  • Guide de l’IA : rechercher d’autres tickets portant le même numéro
  • Limitation du débit
  • Maîtriser le modèle de stratégie d’entreprise
  • Mise en forme conditionnelle
  • Mode test du formulaire
  • Options de contenu de l’éditeur de modules
  • Paramètres de sécurité SD
  • PaT SD : présentation des modèles
  • PaT SD Présentation de la carte
  • Présentation de la carte SD PaT
  • Rapports H&S en temps réel
  • Rich text, file uploads and speech to text
  • Stacked views, flip cards, tabs and stages
  • Système de stratégie
  • Tableau de bord SD : créer un tableau de bord
  • Utiliser Chat to SD pour passer de bon manager à excellent manager
  • Utiliser les SDs comme document du LMS
  • PaT Lite : les principaux aspects de PaT que vous devez comprendre
  • Qu’est-ce que PaT et pourquoi est-ce important ?
  • PaT Lite : de la discussion à la tâche
  • PaT Lite : présentation des Strategy Documents
  • PaT Lite : philosophie fondamentale — normes et exécution tactique
  • PaT Lite : des outils intelligents qui réfléchissent avec vous
  • PaT Lite : L’avenir des entreprises, c’est la culture
  • Sécurité
  • Intégrations
0/46
Foundation
0/43
Practitioner
0/37
Advanced
0/20
Super User
  1. Documentation
  2. Avancé
  3. Grids: columns, formats and filters

Cette page n’a pas encore été traduite et s’affiche donc en anglais.

Grids: columns, formats and filters

Summary This module is for people who build grids in PaT forms and dashboards, and for anyone who reads them. It shows how to give a column your own title and put the original back with Reset, show…

Check yourself

Vérification de votre connexion à PaT…

How To

Sur cette page
  • Giving a grid column your own title
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Step 6
  • Step 7
  • Step 8
  • Putting the original title back with Reset
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Showing or hiding all columns at once
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Step 6
  • Step 7
  • Running a grid at full width
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Setting decimal places for a number column
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Step 6
  • Limiting a grouped date column to a first and last date
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Step 6
  • Step 7
  • Step 8
  • Sorts and filters that stay in place
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Step 6
  • Step 7
  • Step 8
  • Purpose / Intent of the Module
  • Header One

Summary This module is for people who build grids in PaT forms and dashboards, and for anyone who reads them. It shows how to give a column your own title and put the original back with Reset, show or hide every column at once, and run a grid at full width. It also covers the decimal places and date limits set in a data source, and the sorts and filters a grid keeps while you work.

Giving a grid column your own title

Step 1

The person who builds the form or dashboard does this. On the canvas of the SD Form Builder or SD Dashboard, click the grid's edit button (the pencil) at its top right. The Edit form field window opens on its General tab, with the grid's columns further down.

Step 2

Click the three dots at the right end of a column's header. The column's settings open, with its current title in bold at the top.

Step 3

Under Column Title, type the title you want people to see. The column's header changes as you type.

Step 4

Click Save at the bottom of the column's settings to close them.

Step 5

Click the green Save and Close button at the bottom right of the window to keep the new title.

Step 6

On a grid whose Data Mode is Endpoint pulled from a data source, the columns and their titles come from the endpoint. Once saved, a title you typed yourself is kept every time the grid loads its columns again, such as when it refreshes or when you next open the Edit form field window.

Step 7

Columns you have not renamed keep taking their titles from the endpoint: each time the grid loads its columns, they show the title the endpoint gives them.

Step 8

Save before you refresh. In the Edit form field window, the refresh button just above the columns (pointing at it shows Refresh column data from API endpoint) can load the columns as they were last saved, so a title you have not saved yet can be lost.

Putting the original title back with Reset

Step 1

Once a column has a title you typed, a Reset button with a curved arrow appears beside its Column Title box. Pointing at the button shows Reset to API column name.

Step 2

Click Reset. Until the grid loads again, the box and the column's header show the column's internal name instead of a title.

Step 3

Click the green Save and Close button. The next time the grid loads, in the form or in the Edit form field window, the column shows the endpoint's title again.

Step 4

Reset is meant for grids that take their data from an endpoint. A grid filled in by hand has no endpoint title to go back to, so on those grids type the title again instead of clicking Reset.

Showing or hiding all columns at once

Step 1

In the grid's Edit form field window, the Show All and Hide All buttons sit just above the grid of columns, at its right, on the General tab.

Step 2

Click Hide All. It hides every column except the first, which holds the round + for adding rows. A message confirms how many columns were hidden.

Step 3

Click Show All to show every column again. A message confirms how many columns are shown.

Step 4

To hide or show one column, click the three dots in its header. Under Hide Attributes, click the Column switch so it reads HIDE, or click it again so it reads SHOW.

Step 5

In the Edit form field window, hidden columns stay in view so you can still set them up. Each one shows an eye with a line through it beside its three dots. Pointing at the eye shows Column is hidden from view.

Step 6

People using the finished form or dashboard do not see hidden columns.

Step 7

Click the green Save and Close button. Then open the Edit form field window again and check that each column you hid still shows the eye with a line through it.

Running a grid at full width

Step 1

In the grid's Edit form field window, on the General tab, find Full Width Grid in the Grid section, which is already open, and switch it on. The note under the switch says the grid will expand to use the full available width of its container.

Step 2

With Full Width Grid on, the grid stretches across the whole space it sits in. With it off, the grid is only as wide as its columns added together.

Step 3

Full Width Grid is offered only on grids whose Data Mode is Endpoint pulled from a data source. A grid filled in by hand already spans the full width.

Step 4

On a phone-sized screen, the grid keeps the width of its columns and scrolls sideways, even with Full Width Grid on.

Step 5

Click the green Save and Close button to keep the setting.

Setting decimal places for a number column

Step 1

Decimal places are set by the person who looks after the grid's data source. In the Endpoint Manager, click Edit Endpoint on the card of the UDF the grid uses. The Configure Data Source window opens.

Step 2

Click the Columns tab, then click the header of a number column in the data table. The column's settings open on the right, with Number chosen under Data Type.

Step 3

Under Decimal Places, type how many decimal places to show, from 0 to 10. The setting starts at 2.

Step 4

Decimal Places also appears for calculated columns, where it applies when the result is a number. It matters most for values such as an average, which often have many decimal places.

Step 5

Click Apply to Data at the top of the window to save the change. The data table then shows the column's numbers with that many decimal places.

Step 6

Grids in forms and dashboards built on the endpoint show the column with that many decimal places too: with 0, 4 shows as 4, not 4.00.

Limiting a grouped date column to a first and last date

Step 1

Date limits are also set in Configure Data Source. On the Columns tab, click the header of a date column in the data table to open its settings.

Step 2

Under Group By, switch on Enable GROUP BY. Lower down, three more settings appear for the date column: Date Aggregation (Padding), Min Bound Date and Max Bound Date.

Step 3

Under Min Bound Date, open Min Date Boundary and choose where the dates start. Default - Min in dataset starts at the earliest date in the data.

Step 4

Under Max Bound Date, open Max Date Boundary and choose where the dates end. A column starts with Default - Up to yesterday data, which ends at yesterday. Default - Max in dataset ends at the latest date in the data.

Step 5

To set a boundary from a date of your own, first add a rule on a date column under WHERE Clause in the Query Builder tab. That column is then listed in Min Date Boundary and Max Date Boundary by its title, followed by its internal name in brackets. Choose it to take the boundary from that rule.

Step 6

If no date column has a rule, Min Bound Date and Max Bound Date say No date columns available in WHERE clause filters.

Step 7

The limits set the first and last dates used when the data is grouped by date. Under Date Aggregation (Padding), Gap Filling Strategy sets how missing dates are handled. It starts on None - Standard date grouping.

Step 8

Click Apply to Data to save the changes and see the result.

Sorts and filters that stay in place

Step 1

Anyone reading a grid in a form or dashboard can filter or sort it by a column. Click the three dots in the column's header to open its menu.

Step 2

Under Filter, type a value and choose a Filter Type, such as Contains. Press Enter, or click the green funnel button, to filter the grid.

Step 3

To sort by the column, click Sort A-Z or Sort Z-A under Sort, in the same menu.

Step 4

A small badge then shows in the column's header, green for a filter and purple for a sort. Point at a badge to read what it does, for example Sorted ascending.

Step 5

PaT keeps your filter and sort while the page is open. A grid that takes its data from an endpoint refreshes itself every 2 minutes, or when you click the refresh arrow at its top right. Your filter and sort stay in place when it does. The 2-minute refresh waits while a cell is being edited. After a cell is changed, the grid stops refreshing by itself until it is loaded again, so the refresh does not replace the change.

Step 6

Open the column's menu again to see the filter value and Filter Type you chose, with your sort highlighted.

Step 7

To see every row in its usual order again, open the menu and click Clear Filter, the red funnel button, or Clear Sort.

Step 8

Reloading the page starts the grid again with no filter or sort.

Purpose / Intent of the Module

A brief description of what this module is about

Header One

Ready? Back to the quiz

Rate this page

Checking your PaT sign-in…

PrécédentGrids linked to a reporting SD: history charts and review commentsSuivant Grids: conditional formatting

Sur cette page

  • Giving a grid column your own title
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Step 6
  • Step 7
  • Step 8
  • Putting the original title back with Reset
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Showing or hiding all columns at once
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Step 6
  • Step 7
  • Running a grid at full width
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Setting decimal places for a number column
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Step 6
  • Limiting a grouped date column to a first and last date
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Step 6
  • Step 7
  • Step 8
  • Sorts and filters that stay in place
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Step 6
  • Step 7
  • Step 8
  • Purpose / Intent of the Module
  • Header One
PPaT Wiki

Documentation, base de connaissances et assistance communautaire pour People and Tasks.

Documentation

  • Premiers pas
  • Concepts fondamentaux
  • Intégrations
  • Référence de l’API Bientôt

Assistance

  • Base de connaissances
  • Notes de version
  • Forum communautaire
  • Nous contacter
  • État du service

Entreprise

  • PaT
  • Blogue
  • Conditions d’utilisation
  • Confidentialité

© People and Tasks. Tous droits réservés.