PPaT Wiki
DocumentationPathwayForumBlogContact
Week streakFOUNDATION0 badge
Langue: Français
  • English
  • Nederlands
  • Français
  • Deutsch
  • Lea faka-Tonga
  • Te reo Māori
  • မြန်မာ (Burmese)
Poser une question à la communauté

Your PaT Pathway

0/46
Foundation
0/43
Practitioner
0/37
Advanced
0/20
Super User
  • Activité du système : escalades, connexions, e-mails et plus encore
  • Comment configurer votre carte SD
  • Comment créer une campagne pour le portail de formation PaT Lite
  • Comment modifier une publication existante sur le tableau d’affichage
  • Commentaires LMS : évaluations et commentaires des apprenants
  • Configuration système : paramètres de l’entreprise
  • Connexions : relier PaT à Microsoft 365
  • Échelonner les recertifications et les escalades
  • Flux de travail SD - Soumissions multiples
  • Formulaires - Intégration API
  • Gérer les utilisateurs
  • Indicateurs LMS - Si vous ne pouvez pas le mesurer, vous ne pouvez pas le gérer
  • L’organigramme
  • Présentation du modèle d’unité opérationnelle PaT
  • SD Workflows - Paramètres des workflows
  • Structure de l’entreprise : ajouter un nouvel utilisateur
  • Structure de l’entreprise : catégories de processus
  • Structure de l’entreprise : départements, intitulés de poste et rôles
  • Structure de l’entreprise : entreprises clientes
  • Structure de l’entreprise : modules pour un site ou un pays
  • Ajouter une image quelconque comme icône d’en-tête de section
  • Animer des réunions avec les SDs
  • Architecture du LMS
  • Attribuer un SD à un nouveau parent
  • Audits de compréhension
  • Audits de preuves : en réaliser un
  • Catégorisation des éléments de SD
  • Classer et retrouver les SDs
  • Comment déverrouiller un module pour un membre du personnel
  • Comment fonctionnent les discussions SD avec les membres SD et les utilisateurs externes
  • Comment PaT gère les utilisateurs inactifs
  • Connexion des cartes SD et mise à jour des images
  • De l’e-mail au chat, puis du chat à l’e-mail – pour les utilisateurs qui ne sont pas sur PaT
  • Déplacer les en-têtes de section
  • Différentes utilisations des formulaires
  • Discussions en ligne
  • Discussions épinglées
  • Discuter pour créer un SD
  • Du chat à l’e-mail, puis de l’e-mail au chat
  • Du chat à la tâche, puis au projet
  • E-mail vers BFF
  • Fonctionnalité de détachement du chat
  • Fonctions du propriétaire de SD
  • Formation spécifique au client : fonctionnement
  • Icônes d’information
  • Intégrer des données en temps réel dans un SD (graphiques et feuilles de calcul)
  • Intégrer des SDs dans des SDs
  • Intégrité dans l’exécution des tâches : ce que c’est et pourquoi elle diminue
  • Inviter des participants
  • Modèles de santé et de sécurité
  • Mur des formulaires
  • Partager et enregistrer votre écran
  • PaT AI
  • Pièces jointes C2E
  • Rappel de chat
  • Salons vidéo : arrivée des invités et demandes d’enregistrement
  • SD Réponses au formulaire : trouver et exporter les réponses au formulaire
  • Suivre l’engagement
  • Tâches multiples
  • Tâches récurrentes : créer et modifier
  • Utiliser les SDs comme application de rapports ou de comptes rendus de réunion
  • Visites de sécurité
  • Vue du tableau des tâches SD
  • Absence du bureau : activation et calendrier sur votre mur des tâches
  • Ajouter des membres et définir les autorisations
  • Alertes de notes de version : une conversation Sys Bot lorsque les notes de version de PaT changent
  • Appels vidéo sur l’application mobile
  • Capturer et gérer les dangers
  • Chat en tâche
  • Comment intégrer Outlook à votre PaT
  • Comment redimensionner votre navigateur pour afficher PaT de façon optimale
  • Comment utiliser le portail de formation PaT Lite
  • Communication contextuelle
  • Convertir une note en tâche
  • Créer un nouveau SD
  • Créer une tâche
  • Discussions de groupe
  • Éléments SD
  • Enregistrer et gérer les accidents
  • Espace de stockage des documents : liens partagés, vos dossiers et vos favoris
  • État du service PaT : page d’état, alertes et avis de service
  • Extensions Chrome essentielles
  • Fonctionnalités utiles de la page principale du SD
  • Formation aux modules - Mobile
  • Gestion des tâches
  • Importer des pièces jointes
  • Insérer des liens
  • L’icône de connexion sur votre bureau PaT
  • Lire un SD dans une autre langue
  • Mesures de sécurité pour plusieurs utilisateurs sur un appareil
  • Modules de formation - Ordinateur de bureau
  • Mon profil
  • Mur de discussion
  • Mur des tâches
  • Notes
  • Notes rapides
  • Notifications d’activité
  • Obtenir de l’aide : le centre d’assistance PaT
  • Partager des commentaires
  • PaT Mobile App – Présentation
  • PaT Wiki : effectuer une recherche, consulter la réponse de l’IA et l’évaluer
  • PaT Wiki : trouver votre chemin
  • Présentation de PaT pour les débutants – Chats et SDs
  • Présentation du chat PaT
  • Prévisualiser, télécharger et partager des fichiers
  • Problème d’authentification à deux facteurs dans Outlook
  • Progression avec feu tricolore
  • Publier un message sur le tableau d’affichage
  • Recherche globale
  • Résumé IA : un résumé rapide d’un SD
  • SD : présentation
  • Se connecter à PaT et réinitialiser votre mot de passe
  • Se connecter avec l’authentification multifacteur : la deuxième étape
  • Système de gestion des tâches
  • Titres de section
  • Wiki de votre entreprise : rechercher dans les modules de votre entreprise
  • Administration de Playbook : les tickets derrière chaque catégorie Qualité et coût
  • Administration des modules : trouver et gérer les modules
  • Administration des playbooks : lorsque votre exécution à blanc est prête à être examinée
  • Boutons de formulaire, PDF et suite à donner après l’envoi
  • Calculated fields and calculated columns
  • Champs de formulaire : valeurs par défaut, lecture seule et autres paramètres
  • Champs obligatoires, validation et conteneurs
  • Charts: options for lines, bars, axes and single values
  • Comment ajouter des éléments de formulaire à un SD
  • Comment créer des audits de preuves pour les modules
  • Comment créer des évaluations de compréhension de module
  • Comment créer des modules dans le Module Publisher
  • Comment créer des quiz de module
  • Comment intégrer un SD dans le LMS
  • Comment les responsables peuvent activer l’absence du bureau (OOF) pour les membres de leur équipe
  • Comment rendre les modèles de formulaire accessibles à tous
  • Comment utiliser le PAR SD
  • Configuration d’une UDF : filtres, regroupement et détails du point de terminaison
  • Configuration des notifications de fin de module
  • Configurer une UDF : colonnes et colonnes calculées
  • Créateur de formulaires : types de champs
  • Créer un système de reporting
  • Data sources: stage filters, dynamic dates and page values
  • Éditeur de playbook : ajouter une étape qui annule une commande
  • Éditeur de playbooks : ajouter une étape de consultation dans le portail
  • Escalade automatique
  • Fonctions d’aide des modèles SD
  • Form Builder: layout at each screen size
  • Form Builder: tools and shortcuts
  • Formation spécifique aux clients : configuration
  • Formulaires – Extraire des données (le générateur de formulaires IA)
  • Formulaires purs
  • Formulaires SD
  • Gestion des chats – conseils de pro
  • Gestionnaire de points de terminaison : rechercher des points de terminaison et créer votre propre UDF
  • Grids linked to a reporting SD: history charts and review comments
  • Grids: columns, formats and filters
  • Grids: conditional formatting
  • Grids: flatten and transpose data
  • Grids: rows, default values and editing rules
  • Guide de l’IA : rechercher d’autres tickets portant le même numéro
  • Limitation du débit
  • Maîtriser le modèle de stratégie d’entreprise
  • Mise en forme conditionnelle
  • Mode test du formulaire
  • Options de contenu de l’éditeur de modules
  • Paramètres de sécurité SD
  • PaT SD : présentation des modèles
  • PaT SD Présentation de la carte
  • Présentation de la carte SD PaT
  • Rapports H&S en temps réel
  • Rich text, file uploads and speech to text
  • Stacked views, flip cards, tabs and stages
  • Système de stratégie
  • Tableau de bord SD : créer un tableau de bord
  • Utiliser Chat to SD pour passer de bon manager à excellent manager
  • Utiliser les SDs comme document du LMS
  • PaT Lite : les principaux aspects de PaT que vous devez comprendre
  • Qu’est-ce que PaT et pourquoi est-ce important ?
  • PaT Lite : de la discussion à la tâche
  • PaT Lite : présentation des Strategy Documents
  • PaT Lite : philosophie fondamentale — normes et exécution tactique
  • PaT Lite : des outils intelligents qui réfléchissent avec vous
  • PaT Lite : L’avenir des entreprises, c’est la culture
  • Sécurité
  • Intégrations
0/46
Foundation
0/43
Practitioner
0/37
Advanced
0/20
Super User
  1. Documentation
  2. Avancé
  3. Form Builder: tools and shortcuts

Cette page n’a pas encore été traduite et s’affiche donc en anglais.

Form Builder: tools and shortcuts

Summary A lesson for people who build forms in PaT's Form Builder. It covers the tools around the fields: starting a new form, placing, editing and moving fields, Hide Title and Advance mode, the…

Check yourself

Vérification de votre connexion à PaT…

How To

Sur cette page
  • Finding the Form Builder's tools
  • Step 1
  • Step 2
  • Starting a new form
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Placing and moving fields on the Canvas
  • Step 1
  • Step 2
  • Step 3
  • Editing a field
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Hiding a field's title
  • Step 1
  • Step 2
  • Step 3
  • Using Advance mode for a list of options
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Opening the Reorder Form Controls panel
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Changing the order in the panel
  • Step 1
  • Step 2
  • Step 3
  • Copying and deleting controls in the panel
  • Step 1
  • Step 2
  • Step 3
  • Moving controls to another view
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Applying or cancelling the panel's changes
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Saving the form
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Using Ctrl+S in the Schema Editor
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Viewing a Data Scene full screen
  • Step 1
  • Step 2
  • Step 3
  • Saving a data source without closing it
  • Step 1
  • Step 2
  • Step 3
  • Purpose / Intent of the Module
  • Header One

Summary A lesson for people who build forms in PaT's Form Builder. It covers the tools around the fields: starting a new form, placing, editing and moving fields, Hide Title and Advance mode, the Reorder Form Controls panel, saving and the (Unsaved changes) mark, Ctrl+S in the Schema Editor, full screen for a Data Scene, and saving a data source without closing it. The lesson Form builder: field types covers the fields themselves.

Finding the Form Builder's tools

Step 1

To open the Form Builder, click Advanced in the SD, then SD Form Builder in the menu on the left. The lesson SD Forms covers it.

Step 2

Across the top of the Form Builder are Fields, Preview and Share on the left, and Settings, Schema, Reorder and Manage Views on the right. Fields shows or hides the Controls panel. Until the Canvas has at least one field, all of them except Fields are greyed out.

Starting a new form

Step 1

On an empty form, the Canvas shows Start Building Your Form, with a Use AI button under it. Click Use AI, or the Form Assistant tab beside the Controls tab at the top of the left panel, to build the form with AI. The Form Assistant works only while the form is empty.

Step 2

To build the form yourself, drag a control from the Controls panel on the left and drop it onto the Canvas. The Start Building Your Form message goes once the first field is in place.

Step 3

The Form Assistant tab offers two choices, split by OR: Option 1: Describe your form, with a Generate Form button, and Option 2: Have a conversation to build your form, with Start Form Planning Conversation.

Step 4

Generate Form stays greyed out until you type a description. Start Form Planning Conversation is greyed out while the description box has text in it. The lesson Forms - Extract Data (the AI form builder) covers both.

Placing and moving fields on the Canvas

Step 1

To put a new field between others, drop the control onto the field it should go above. The new field goes in at that place, and the fields below it move down.

Step 2

To move a field already on the Canvas, drag its Move button (the crossed arrows at the field's top right) and drop the field in its new place. The form saves straight away.

Step 3

To drop a field into a Field Group, or to keep it out of one, see the Container part of the lesson Form builder: field types.

Editing a field

Step 1

Click the field's Edit button (the pencil at its top right). While the editor gets ready, the Canvas shows Field Editor Loading... and Preparing field configuration.

Step 2

The Edit form field window then opens, named after the field's type, for example Edit form field Single-Select Dropdown. Its settings are grouped in tabs, such as General.

Step 3

Make your changes, then click the green Save and Close button at the bottom right. Saving the field also saves the form: if (Unsaved changes) then shows in red on the Canvas heading, click Save Form Now. To leave without saving, click the red Close at the top right of the window.

Step 4

When the window closes, the page scrolls back to where you were, so you keep your place on a long form.

Step 5

If what the window holds is wider than the window, for example a table with many columns, hold Shift and turn your mouse's scroll wheel to scroll sideways.

Hiding a field's title

Step 1

In the field's Edit form field window, on the General tab, find Hide Title. Click its switch so that it shows YES, then click Save and Close.

Step 2

The field then shows without its title for the person filling in the form. To show the title again, set Hide Title back to NO.

Step 3

A Field Group's Hide Title works the same way, whether its Display Style is Accordion or Container: YES hides the group's title on the form, and NO shows it.

Using Advance mode for a list of options

Step 1

Advance mode is a switch on the General tab of the Edit form field window for a Dropdown (Single selection), a Dropdown (Multiple selections) or Radio Buttons, below the options table. It starts at NO. It is a different switch from Advance Mode: Switch to advance mode, under the Title, which is for the title.

Step 2

With Advance mode at NO, the options table has one column, Label. Type each option in it.

Step 3

Click the Advance mode switch so that it shows YES. The options table then has the columns Name, Value, Label and Input, and an orange note appears under it.

Step 4

Type each option's Name. If you leave both its Value and its Label empty, they take the Name when you click Save and Close.

Opening the Reorder Form Controls panel

Step 1

Click Reorder at the top right of the Form Builder, between Schema and Manage Views. The Reorder Form Controls panel slides in at the right of the screen.

Step 2

The panel lists the form's controls in order, and says how many there are, for example 12 controls. Each row shows the control's title, or its name without the long ID that PaT adds to the end of names, and a tag with its type.

Step 3

A Field Group's row shows how many fields it holds, and its fields are listed under it, indented, each with an N tag. Click the arrow at the left of a Field Group's row to collapse or expand its fields.

Step 4

To find a control, type part of its name, title or type in Search controls... at the top. Matching rows are highlighted, and the box shows which match you are on, for example 1/3. Its up and down arrows go from match to match, and its X clears the search.

Changing the order in the panel

Step 1

Drag a row up or down the list, and drop it where the control should go.

Step 2

To put a control into a Field Group, drag it down onto the Field Group's row. If the control is below the group, drop it onto one of the fields already in the group instead.

Step 3

Dragging a Field Group moves it with all its fields.

Copying and deleting controls in the panel

Step 1

To copy a control, click the copy icon near the right end of its row, before its type tag (Duplicate this item). The copy appears under the original, with (Copy) after its title.

Step 2

To delete a control, click the bin icon at the right end of its row (Delete this item). The row asks Are you sure you want to delete? Click Yes to delete it, or No to keep it.

Step 3

Deleting a Field Group deletes its fields too, and the row says how many, for example This will delete 3 child fields too. A message confirms each copy or delete.

Moving controls to another view

Step 1

If the form has views, added with Manage Views, the panel's title shows the view you are in, for example View: Default, and the panel lists only that view's controls. Controls in the default view have a Default tag.

Step 2

To move a control to another view, click the layers icon on its row (Transfer to another view). Under Transfer to View, choose Default View or another view by its title. The view the control is in now is marked (current).

Step 3

A message confirms the move, and the control leaves the list, because the panel shows only the view you are in. A Field Group's fields move with it. A control taken out of its Field Group's view becomes a top-level control, and the message ends with (moved to top level).

Step 4

To work on another view's controls, switch the Canvas to that view first, then open the panel.

Applying or cancelling the panel's changes

Step 1

Nothing you do in the panel reaches the form until you apply it. While you have changes, the panel shows Unsaved at its bottom left.

Step 2

Click Apply and Close at the bottom right to put your changes on the Canvas and close the panel. The button stays greyed out until you change something.

Step 3

To apply your changes and keep working in the panel, click the small arrow beside the button and choose Apply (Keep Open). Your changes go on the Canvas, and the panel stays open as you left it, with your search and closed groups. The button then reads Apply.

Step 4

To leave without applying, click Cancel, or the X at the top right of the panel. If you have changes, PaT first asks You have unsaved changes. Discard them?

Step 5

Applying does not save the form: PaT says Controls reordered successfully! Remember to save your changes. Save the form as the next part shows.

Saving the form

Step 1

Some changes save as you make them, such as Save and Close in a field's Edit form field window, or moving a field with its Move button. PaT shows Saving form, please wait... at once. If (Unsaved changes) then shows in red on the Canvas heading, click Save Form Now.

Step 2

Other changes wait for you to save, such as adding a new control, or applying the Reorder panel or the Schema Editor. The Canvas heading above the form then shows (Unsaved changes) in red, with a Save Form Now button at the right.

Step 3

Click Save Form Now, or the green Save button beside the device buttons at the top of the form on the Canvas. When the save is done, (Unsaved changes) goes.

Step 4

(Unsaved changes) shows only when the form differs from its last saved copy, so opening a form does not mark it.

Step 5

If you leave the Form Builder before saving, your unsaved changes are lost, and PaT does not warn you.

Using Ctrl+S in the Schema Editor

Step 1

Click Schema at the top right of the Form Builder. The Schema Editor opens on the right, with the form written as JSON.

Step 2

Click in the editor and make your change, then press Ctrl+S (Cmd+S on a Mac). PaT puts the change on the Canvas and says Changes applied to editor. Ctrl+S works only while your cursor is in the Schema Editor.

Step 3

If nothing has changed, PaT says No changes to apply. If the JSON has a mistake, it says Invalid JSON format, and the Canvas stays as it was.

Step 4

The Save Schema button, which appears under the editor once you change something, also puts your change on the Canvas. Neither saves the form itself: click Save Form Now afterwards.

Viewing a Data Scene full screen

Step 1

A Data Scene field, from the Custom control, shows its data as a 3D view. Until it has data, it shows No Visualization Data Available instead.

Step 2

Once it has data, a small button with an expand icon sits at its bottom right (Full Screen). Click it and the Data Scene fills the screen, on the Canvas or for the person viewing the form.

Step 3

To go back, press Esc, or click the button again (Exit Full Screen).

Saving a data source without closing it

Step 1

In the Endpoint Manager, click Edit Endpoint on a data source's card. The Configure Data Source window opens, with the data source's name in its title.

Step 2

In the Configure Data Source window, click Apply to Data at the top right, or press Ctrl+S, to save your changes. The window stays open, so you can keep working.

Step 3

To close the window, click the X at its top right. If anything is unsaved, PaT asks You have unsaved changes. Are you sure you want to close? The lesson Configuring a UDF: columns and calculated columns covers the window.

Purpose / Intent of the Module

A brief description of what this module is about

Header One

Ready? Back to the quiz

Rate this page

Checking your PaT sign-in…

PrécédentForm Builder: layout at each screen sizeSuivant Formation spécifique aux clients : configuration

Sur cette page

  • Finding the Form Builder's tools
  • Step 1
  • Step 2
  • Starting a new form
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Placing and moving fields on the Canvas
  • Step 1
  • Step 2
  • Step 3
  • Editing a field
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Hiding a field's title
  • Step 1
  • Step 2
  • Step 3
  • Using Advance mode for a list of options
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Opening the Reorder Form Controls panel
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Changing the order in the panel
  • Step 1
  • Step 2
  • Step 3
  • Copying and deleting controls in the panel
  • Step 1
  • Step 2
  • Step 3
  • Moving controls to another view
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Applying or cancelling the panel's changes
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Saving the form
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Using Ctrl+S in the Schema Editor
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Viewing a Data Scene full screen
  • Step 1
  • Step 2
  • Step 3
  • Saving a data source without closing it
  • Step 1
  • Step 2
  • Step 3
  • Purpose / Intent of the Module
  • Header One
PPaT Wiki

Documentation, base de connaissances et assistance communautaire pour People and Tasks.

Documentation

  • Premiers pas
  • Concepts fondamentaux
  • Intégrations
  • Référence de l’API Bientôt

Assistance

  • Base de connaissances
  • Notes de version
  • Forum communautaire
  • Nous contacter
  • État du service

Entreprise

  • PaT
  • Blogue
  • Conditions d’utilisation
  • Confidentialité

© People and Tasks. Tous droits réservés.