PPaT Wiki
DocumentatiePathwayForumBlogContact
Week streakFOUNDATION0 badges
Taal: Nederlands
  • English
  • Nederlands
  • Français
  • Deutsch
  • Lea faka-Tonga
  • Te reo Māori
  • မြန်မာ (Burmese)
Stel uw vraag aan de community

Your PaT Pathway

0/46
Foundation
0/43
Practitioner
0/37
Advanced
0/20
Super User
  • Bedrijfsstructuur: afdelingen, functietitels en rollen
  • Bedrijfsstructuur: een nieuwe gebruiker toevoegen
  • Bedrijfsstructuur: klantbedrijven
  • Bedrijfsstructuur: modules voor een vestiging of een land
  • Bedrijfsstructuur: procescategorieën
  • Een bestaand bericht op het prikbord bewerken
  • Een campagne maken voor het PaT Lite-trainingsportaal
  • Formulieren - API-integratie
  • Gebruikers beheren
  • Het organigram
  • LMS-feedback: beoordelingen en opmerkingen van cursisten
  • LMS-statistieken - Als u het niet kunt meten, kunt u het niet beheren
  • PaT Business Unit-sjabloonoverzicht
  • Recertificeringen en escalaties spreiden
  • SD-workflows - Meerdere inzendingen
  • SD-workflows - Workflowinstellingen
  • Systeemactiviteit: escalaties, aanmeldingen, e-mails en meer
  • Systeemconfiguratie: bedrijfsinstellingen
  • Uw SD Map instellen
  • Verbindingen: PaT koppelen aan Microsoft 365
  • Begripsaudits
  • Betrokkenheid bijhouden
  • Bewijsaudits: een audit voltooien
  • C2E-bijlagen
  • Categorisering van SD-elementen
  • Chat naar SD
  • Chatherinnering
  • Chatvenster loskoppelen
  • Deelnemers uitnodigen
  • E-mail naar BFF
  • E-mail naar chat naar e-mail – voor niet-PaT-gebruikers
  • Een module ontgrendelen voor een medewerker
  • Een SD aan een nieuwe bovenliggende map toewijzen
  • Elke afbeelding toevoegen als pictogram voor een sectiekop
  • Formulierenoverzicht
  • Hoe PaT inactieve gebruikers beheert
  • Info-iconen
  • Inline chats
  • Klantgerichte training: zo werkt het
  • Live gegevens insluiten in een SD (grafieken en spreadsheets)
  • LMS-architectuur
  • Meervoudige taken
  • PaT AI
  • SD-eigenaarfuncties
  • SD-formulierreacties: formulierreacties vinden en exporteren
  • SD-taakbordweergave
  • SDs gebruiken als rapportage- of notulenapp
  • SDs insluiten in SDs
  • SDs opslaan en terugvinden
  • SDs vastmaken aan het dock en afbeeldingen bijwerken
  • Sectiekoppen verplaatsen
  • Sjablonen voor gezondheid en veiligheid
  • Taakintegriteit: wat het is en waarom uw score daalt
  • Terugkerende taken: aanmaken en bewerken
  • Uw scherm delen en opnemen
  • Van chat naar e-mail en terug naar chat
  • Van chat naar taak naar project
  • Vastgezette chats
  • Veiligheidsrondes
  • Vergaderingen leiden met SDs
  • Verschillende toepassingen van formulieren
  • Videoruimtes: gasten die deelnemen en vragen om op te nemen
  • Zo werken chats in SD met SD-leden en externe gebruikers
  • Aanmelden bij PaT en uw wachtwoord opnieuw instellen
  • Activiteitsmeldingen
  • Afwezig: inschakelen en de agenda op uw Taakmuur
  • AI-samenvatting: een korte samenvatting van een SD
  • Bedrijfswiki: zoeken in de modules van uw bedrijf
  • Bestanden bekijken, downloaden en delen
  • Bestandsbijlagen uploaden
  • Beveiligingsmaatregelen voor meerdere gebruikers op één apparaat
  • Chat naar taak
  • Chatmuur
  • Contextuele communicatie
  • Documentenopslag: gedeelde links, uw mappen en favorieten
  • Een bericht op het prikbord plaatsen
  • Een nieuwe SD maken
  • Een notitie omzetten in een taak
  • Een SD in een andere taal lezen
  • Een taak aanmaken
  • Essentiële Chrome-extensies
  • Feedback delen
  • Gevaren vastleggen en beheren
  • Globaal zoeken
  • Groepschats
  • Handige functies op de hoofdpagina van de SD
  • Het verbindingspictogram op uw PaT-desktop
  • Hulp krijgen: de PaT-helpdesk
  • Inloggen met MFA: de tweede stap
  • Introductie voor beginners in PaT – Chats en SDs
  • Koppelingen invoegen
  • Leden toevoegen en machtigingen instellen
  • Leermodules - desktop
  • Meldingen over release-opmerkingen: een chat met Sys Bot wanneer de release-opmerkingen van PaT veranderen
  • Mijn profiel
  • Module leren - mobiel
  • Notities
  • Ongevallen registreren en beheren
  • Outlook insluiten in uw PaT
  • PaT Chat-overzicht
  • PaT Wiki: uw weg vinden
  • PaT Wiki: zoeken, het AI-antwoord en de beoordeling ervan
  • PaT-mobiele app – overzicht
  • PaT-servicestatus: de statuspagina, statusmeldingen en statusberichten
  • Probleem met 2FA in Outlook
  • SD-elementen
  • SD-overzicht
  • Sectiekoppen
  • Snelle notities
  • Taakbeheer
  • Taakbeheersysteem
  • Takenmuur
  • Verkeerslichtvoortgang
  • Videogesprekken in de mobiele app
  • Zo gebruikt u het PaT Lite-trainingsportaal
  • Zo past u uw browser aan voor de beste weergave van PaT
  • AI-playbook: controleren op andere tickets met hetzelfde nummer
  • Automatische escalatie
  • Beperking
  • Calculated fields and calculated columns
  • Charts: options for lines, bars, axes and single values
  • Chat to SD gebruiken om van een goede manager een geweldige manager te worden
  • Chatbeheer - Pro-tips
  • Data sources: stage filters, dynamic dates and page values
  • De Business Strategy Template beheersen
  • Editor voor draaiboeken: een stap toevoegen die een bestelling annuleert
  • Een modulequiz maken
  • Een rapportagesysteem opzetten
  • Een SD insluiten in het LMS
  • Een UDF configureren: filters, groepering en endpointgegevens
  • Een UDF configureren: kolommen en berekende kolommen
  • Endpoint Manager: endpoints vinden en uw eigen UDF maken
  • Form Builder: layout at each screen size
  • Form Builder: tools and shortcuts
  • Form buttons, PDFs and what happens after submit
  • Formulierbouwer: veldtypen
  • Formulierelementen uploaden naar een SD
  • Formulieren - Gegevens extraheren (de AI-formulierbouwer)
  • Formuliertemplates voor iedereen beschikbaar maken
  • Formuliertestmodus
  • Grids linked to a reporting SD: history charts and review comments
  • Grids: columns, formats and filters
  • Grids: conditional formatting
  • Grids: flatten and transpose data
  • Grids: rows, default values and editing rules
  • Hoe managers OOF kunnen inschakelen voor hun medewerkers
  • Hoe u audits op begrip creëert
  • Hoe u de PAR SD gebruikt
  • Instellen van meldingen voor het voltooien van modules
  • Klantgebonden training instellen
  • Live H&S-rapportage
  • Module-evidentieaudits maken
  • Modulebeheer: modules vinden en beheren
  • Modules bouwen in de Module Publisher
  • Opties voor module-inhoud in de Module Publisher
  • Overzicht van PaT-SD-sjablonen
  • PaT SD-kaartpresentatie
  • PaT SD-mapoverzicht
  • Playbook Admin: de tickets achter elke kwaliteits- en kostencategorie
  • Playbook Admin: wanneer uw schaduwuitvoering klaar is om te beoordelen
  • Playbook-editor: een portalopzoekstap toevoegen
  • Pure formulieren
  • Rich text, file uploads and speech to text
  • SD-beveiligingsinstellingen
  • SD-dashboard: een dashboard bouwen
  • SD-formulieren
  • SD-sjabloonhulpfuncties
  • SDs gebruiken als LMS-document
  • Stacked views, flip cards, tabs and stages
  • Strategie­systeem
  • Veldinstellingen: standaardwaarden, alleen-lezen en overige instellingen
  • Verplichte velden, validatie en containers
  • Voorwaardelijke opmaak
  • PaT Lite: Belangrijke aspecten van PaT die u moet begrijpen
  • Wat is PaT en waarom is het belangrijk
  • PaT Lite: Van chat naar taak
  • PaT Lite: Introductie van Strategy Documents
  • PaT Lite: Kernfilosofie – normen en tactische uitvoering
  • PaT Lite: Intelligente tools die met u meedenken
  • PaT Lite: De toekomst van zakendoen is cultuur
  • Beveiliging
  • Integraties
0/46
Foundation
0/43
Practitioner
0/37
Advanced
0/20
Super User
  1. Documentatie
  2. Geavanceerd
  3. Form Builder: tools and shortcuts

Deze pagina is nog niet vertaald en wordt daarom in het Engels weergegeven.

Form Builder: tools and shortcuts

Summary A lesson for people who build forms in PaT's Form Builder. It covers the tools around the fields: starting a new form, placing, editing and moving fields, Hide Title and Advance mode, the…

Check yourself

Uw aanmelding bij PaT wordt gecontroleerd…

How To

Op deze pagina
  • Finding the Form Builder's tools
  • Step 1
  • Step 2
  • Starting a new form
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Placing and moving fields on the Canvas
  • Step 1
  • Step 2
  • Step 3
  • Editing a field
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Hiding a field's title
  • Step 1
  • Step 2
  • Step 3
  • Using Advance mode for a list of options
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Opening the Reorder Form Controls panel
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Changing the order in the panel
  • Step 1
  • Step 2
  • Step 3
  • Copying and deleting controls in the panel
  • Step 1
  • Step 2
  • Step 3
  • Moving controls to another view
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Applying or cancelling the panel's changes
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Saving the form
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Using Ctrl+S in the Schema Editor
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Viewing a Data Scene full screen
  • Step 1
  • Step 2
  • Step 3
  • Saving a data source without closing it
  • Step 1
  • Step 2
  • Step 3
  • Purpose / Intent of the Module
  • Header One

Summary A lesson for people who build forms in PaT's Form Builder. It covers the tools around the fields: starting a new form, placing, editing and moving fields, Hide Title and Advance mode, the Reorder Form Controls panel, saving and the (Unsaved changes) mark, Ctrl+S in the Schema Editor, full screen for a Data Scene, and saving a data source without closing it. The lesson Form builder: field types covers the fields themselves.

Finding the Form Builder's tools

Step 1

To open the Form Builder, click Advanced in the SD, then SD Form Builder in the menu on the left. The lesson SD Forms covers it.

Step 2

Across the top of the Form Builder are Fields, Preview and Share on the left, and Settings, Schema, Reorder and Manage Views on the right. Fields shows or hides the Controls panel. Until the Canvas has at least one field, all of them except Fields are greyed out.

Starting a new form

Step 1

On an empty form, the Canvas shows Start Building Your Form, with a Use AI button under it. Click Use AI, or the Form Assistant tab beside the Controls tab at the top of the left panel, to build the form with AI. The Form Assistant works only while the form is empty.

Step 2

To build the form yourself, drag a control from the Controls panel on the left and drop it onto the Canvas. The Start Building Your Form message goes once the first field is in place.

Step 3

The Form Assistant tab offers two choices, split by OR: Option 1: Describe your form, with a Generate Form button, and Option 2: Have a conversation to build your form, with Start Form Planning Conversation.

Step 4

Generate Form stays greyed out until you type a description. Start Form Planning Conversation is greyed out while the description box has text in it. The lesson Forms - Extract Data (the AI form builder) covers both.

Placing and moving fields on the Canvas

Step 1

To put a new field between others, drop the control onto the field it should go above. The new field goes in at that place, and the fields below it move down.

Step 2

To move a field already on the Canvas, drag its Move button (the crossed arrows at the field's top right) and drop the field in its new place. The form saves straight away.

Step 3

To drop a field into a Field Group, or to keep it out of one, see the Container part of the lesson Form builder: field types.

Editing a field

Step 1

Click the field's Edit button (the pencil at its top right). While the editor gets ready, the Canvas shows Field Editor Loading... and Preparing field configuration.

Step 2

The Edit form field window then opens, named after the field's type, for example Edit form field Single-Select Dropdown. Its settings are grouped in tabs, such as General.

Step 3

Make your changes, then click the green Save and Close button at the bottom right. Saving the field also saves the form: if (Unsaved changes) then shows in red on the Canvas heading, click Save Form Now. To leave without saving, click the red Close at the top right of the window.

Step 4

When the window closes, the page scrolls back to where you were, so you keep your place on a long form.

Step 5

If what the window holds is wider than the window, for example a table with many columns, hold Shift and turn your mouse's scroll wheel to scroll sideways.

Hiding a field's title

Step 1

In the field's Edit form field window, on the General tab, find Hide Title. Click its switch so that it shows YES, then click Save and Close.

Step 2

The field then shows without its title for the person filling in the form. To show the title again, set Hide Title back to NO.

Step 3

A Field Group's Hide Title works the same way, whether its Display Style is Accordion or Container: YES hides the group's title on the form, and NO shows it.

Using Advance mode for a list of options

Step 1

Advance mode is a switch on the General tab of the Edit form field window for a Dropdown (Single selection), a Dropdown (Multiple selections) or Radio Buttons, below the options table. It starts at NO. It is a different switch from Advance Mode: Switch to advance mode, under the Title, which is for the title.

Step 2

With Advance mode at NO, the options table has one column, Label. Type each option in it.

Step 3

Click the Advance mode switch so that it shows YES. The options table then has the columns Name, Value, Label and Input, and an orange note appears under it.

Step 4

Type each option's Name. If you leave both its Value and its Label empty, they take the Name when you click Save and Close.

Opening the Reorder Form Controls panel

Step 1

Click Reorder at the top right of the Form Builder, between Schema and Manage Views. The Reorder Form Controls panel slides in at the right of the screen.

Step 2

The panel lists the form's controls in order, and says how many there are, for example 12 controls. Each row shows the control's title, or its name without the long ID that PaT adds to the end of names, and a tag with its type.

Step 3

A Field Group's row shows how many fields it holds, and its fields are listed under it, indented, each with an N tag. Click the arrow at the left of a Field Group's row to collapse or expand its fields.

Step 4

To find a control, type part of its name, title or type in Search controls... at the top. Matching rows are highlighted, and the box shows which match you are on, for example 1/3. Its up and down arrows go from match to match, and its X clears the search.

Changing the order in the panel

Step 1

Drag a row up or down the list, and drop it where the control should go.

Step 2

To put a control into a Field Group, drag it down onto the Field Group's row. If the control is below the group, drop it onto one of the fields already in the group instead.

Step 3

Dragging a Field Group moves it with all its fields.

Copying and deleting controls in the panel

Step 1

To copy a control, click the copy icon near the right end of its row, before its type tag (Duplicate this item). The copy appears under the original, with (Copy) after its title.

Step 2

To delete a control, click the bin icon at the right end of its row (Delete this item). The row asks Are you sure you want to delete? Click Yes to delete it, or No to keep it.

Step 3

Deleting a Field Group deletes its fields too, and the row says how many, for example This will delete 3 child fields too. A message confirms each copy or delete.

Moving controls to another view

Step 1

If the form has views, added with Manage Views, the panel's title shows the view you are in, for example View: Default, and the panel lists only that view's controls. Controls in the default view have a Default tag.

Step 2

To move a control to another view, click the layers icon on its row (Transfer to another view). Under Transfer to View, choose Default View or another view by its title. The view the control is in now is marked (current).

Step 3

A message confirms the move, and the control leaves the list, because the panel shows only the view you are in. A Field Group's fields move with it. A control taken out of its Field Group's view becomes a top-level control, and the message ends with (moved to top level).

Step 4

To work on another view's controls, switch the Canvas to that view first, then open the panel.

Applying or cancelling the panel's changes

Step 1

Nothing you do in the panel reaches the form until you apply it. While you have changes, the panel shows Unsaved at its bottom left.

Step 2

Click Apply and Close at the bottom right to put your changes on the Canvas and close the panel. The button stays greyed out until you change something.

Step 3

To apply your changes and keep working in the panel, click the small arrow beside the button and choose Apply (Keep Open). Your changes go on the Canvas, and the panel stays open as you left it, with your search and closed groups. The button then reads Apply.

Step 4

To leave without applying, click Cancel, or the X at the top right of the panel. If you have changes, PaT first asks You have unsaved changes. Discard them?

Step 5

Applying does not save the form: PaT says Controls reordered successfully! Remember to save your changes. Save the form as the next part shows.

Saving the form

Step 1

Some changes save as you make them, such as Save and Close in a field's Edit form field window, or moving a field with its Move button. PaT shows Saving form, please wait... at once. If (Unsaved changes) then shows in red on the Canvas heading, click Save Form Now.

Step 2

Other changes wait for you to save, such as adding a new control, or applying the Reorder panel or the Schema Editor. The Canvas heading above the form then shows (Unsaved changes) in red, with a Save Form Now button at the right.

Step 3

Click Save Form Now, or the green Save button beside the device buttons at the top of the form on the Canvas. When the save is done, (Unsaved changes) goes.

Step 4

(Unsaved changes) shows only when the form differs from its last saved copy, so opening a form does not mark it.

Step 5

If you leave the Form Builder before saving, your unsaved changes are lost, and PaT does not warn you.

Using Ctrl+S in the Schema Editor

Step 1

Click Schema at the top right of the Form Builder. The Schema Editor opens on the right, with the form written as JSON.

Step 2

Click in the editor and make your change, then press Ctrl+S (Cmd+S on a Mac). PaT puts the change on the Canvas and says Changes applied to editor. Ctrl+S works only while your cursor is in the Schema Editor.

Step 3

If nothing has changed, PaT says No changes to apply. If the JSON has a mistake, it says Invalid JSON format, and the Canvas stays as it was.

Step 4

The Save Schema button, which appears under the editor once you change something, also puts your change on the Canvas. Neither saves the form itself: click Save Form Now afterwards.

Viewing a Data Scene full screen

Step 1

A Data Scene field, from the Custom control, shows its data as a 3D view. Until it has data, it shows No Visualization Data Available instead.

Step 2

Once it has data, a small button with an expand icon sits at its bottom right (Full Screen). Click it and the Data Scene fills the screen, on the Canvas or for the person viewing the form.

Step 3

To go back, press Esc, or click the button again (Exit Full Screen).

Saving a data source without closing it

Step 1

In the Endpoint Manager, click Edit Endpoint on a data source's card. The Configure Data Source window opens, with the data source's name in its title.

Step 2

In the Configure Data Source window, click Apply to Data at the top right, or press Ctrl+S, to save your changes. The window stays open, so you can keep working.

Step 3

To close the window, click the X at its top right. If anything is unsaved, PaT asks You have unsaved changes. Are you sure you want to close? The lesson Configuring a UDF: columns and calculated columns covers the window.

Purpose / Intent of the Module

A brief description of what this module is about

Header One

Ready? Back to the quiz

Rate this page

Checking your PaT sign-in…

VorigeForm Builder: layout at each screen sizeVolgende Form buttons, PDFs and what happens after submit

Op deze pagina

  • Finding the Form Builder's tools
  • Step 1
  • Step 2
  • Starting a new form
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Placing and moving fields on the Canvas
  • Step 1
  • Step 2
  • Step 3
  • Editing a field
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Hiding a field's title
  • Step 1
  • Step 2
  • Step 3
  • Using Advance mode for a list of options
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Opening the Reorder Form Controls panel
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Changing the order in the panel
  • Step 1
  • Step 2
  • Step 3
  • Copying and deleting controls in the panel
  • Step 1
  • Step 2
  • Step 3
  • Moving controls to another view
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Applying or cancelling the panel's changes
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Saving the form
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Using Ctrl+S in the Schema Editor
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Viewing a Data Scene full screen
  • Step 1
  • Step 2
  • Step 3
  • Saving a data source without closing it
  • Step 1
  • Step 2
  • Step 3
  • Purpose / Intent of the Module
  • Header One
PPaT Wiki

Documentatie, kennisbank en communityondersteuning voor People and Tasks.

Documentatie

  • Aan de slag
  • Kernconcepten
  • Integraties
  • API-referentie Binnenkort

Ondersteuning

  • Kennisbank
  • Releaseopmerkingen
  • Communityforum
  • Contact opnemen
  • Servicestatus

Bedrijf

  • PaT
  • Blog
  • Voorwaarden
  • Privacy

© People and Tasks. Alle rechten voorbehouden.