PPaT Wiki
DocumentatiePathwayForumBlogContact
Week streakFOUNDATION0 badges
Taal: Nederlands
  • English
  • Nederlands
  • Français
  • Deutsch
  • Lea faka-Tonga
  • Te reo Māori
  • မြန်မာ (Burmese)
Stel uw vraag aan de community

Your PaT Pathway

0/46
Foundation
0/43
Practitioner
0/37
Advanced
0/20
Super User
  • Bedrijfsstructuur: afdelingen, functietitels en rollen
  • Bedrijfsstructuur: een nieuwe gebruiker toevoegen
  • Bedrijfsstructuur: klantbedrijven
  • Bedrijfsstructuur: modules voor een vestiging of een land
  • Bedrijfsstructuur: procescategorieën
  • Een bestaand bericht op het prikbord bewerken
  • Een campagne maken voor het PaT Lite-trainingsportaal
  • Formulieren - API-integratie
  • Gebruikers beheren
  • Het organigram
  • LMS-feedback: beoordelingen en opmerkingen van cursisten
  • LMS-statistieken - Als u het niet kunt meten, kunt u het niet beheren
  • PaT Business Unit-sjabloonoverzicht
  • Recertificeringen en escalaties spreiden
  • SD-workflows - Meerdere inzendingen
  • SD-workflows - Workflowinstellingen
  • Systeemactiviteit: escalaties, aanmeldingen, e-mails en meer
  • Systeemconfiguratie: bedrijfsinstellingen
  • Uw SD Map instellen
  • Verbindingen: PaT koppelen aan Microsoft 365
  • Begripsaudits
  • Betrokkenheid bijhouden
  • Bewijsaudits: een audit voltooien
  • C2E-bijlagen
  • Categorisering van SD-elementen
  • Chat naar SD
  • Chatherinnering
  • Chatvenster loskoppelen
  • Deelnemers uitnodigen
  • E-mail naar BFF
  • E-mail naar chat naar e-mail – voor niet-PaT-gebruikers
  • Een module ontgrendelen voor een medewerker
  • Een SD aan een nieuwe bovenliggende map toewijzen
  • Elke afbeelding toevoegen als pictogram voor een sectiekop
  • Formulierenoverzicht
  • Hoe PaT inactieve gebruikers beheert
  • Info-iconen
  • Inline chats
  • Klantgerichte training: zo werkt het
  • Live gegevens insluiten in een SD (grafieken en spreadsheets)
  • LMS-architectuur
  • Meervoudige taken
  • PaT AI
  • SD-eigenaarfuncties
  • SD-formulierreacties: formulierreacties vinden en exporteren
  • SD-taakbordweergave
  • SDs gebruiken als rapportage- of notulenapp
  • SDs insluiten in SDs
  • SDs opslaan en terugvinden
  • SDs vastmaken aan het dock en afbeeldingen bijwerken
  • Sectiekoppen verplaatsen
  • Sjablonen voor gezondheid en veiligheid
  • Taakintegriteit: wat het is en waarom uw score daalt
  • Terugkerende taken: aanmaken en bewerken
  • Uw scherm delen en opnemen
  • Van chat naar e-mail en terug naar chat
  • Van chat naar taak naar project
  • Vastgezette chats
  • Veiligheidsrondes
  • Vergaderingen leiden met SDs
  • Verschillende toepassingen van formulieren
  • Videoruimtes: gasten die deelnemen en vragen om op te nemen
  • Zo werken chats in SD met SD-leden en externe gebruikers
  • Aanmelden bij PaT en uw wachtwoord opnieuw instellen
  • Activiteitsmeldingen
  • Afwezig: inschakelen en de agenda op uw Taakmuur
  • AI-samenvatting: een korte samenvatting van een SD
  • Bedrijfswiki: zoeken in de modules van uw bedrijf
  • Bestanden bekijken, downloaden en delen
  • Bestandsbijlagen uploaden
  • Beveiligingsmaatregelen voor meerdere gebruikers op één apparaat
  • Chat naar taak
  • Chatmuur
  • Contextuele communicatie
  • Documentenopslag: gedeelde links, uw mappen en favorieten
  • Een bericht op het prikbord plaatsen
  • Een nieuwe SD maken
  • Een notitie omzetten in een taak
  • Een SD in een andere taal lezen
  • Een taak aanmaken
  • Essentiële Chrome-extensies
  • Feedback delen
  • Gevaren vastleggen en beheren
  • Globaal zoeken
  • Groepschats
  • Handige functies op de hoofdpagina van de SD
  • Het verbindingspictogram op uw PaT-desktop
  • Hulp krijgen: de PaT-helpdesk
  • Inloggen met MFA: de tweede stap
  • Introductie voor beginners in PaT – Chats en SDs
  • Koppelingen invoegen
  • Leden toevoegen en machtigingen instellen
  • Leermodules - desktop
  • Meldingen over release-opmerkingen: een chat met Sys Bot wanneer de release-opmerkingen van PaT veranderen
  • Mijn profiel
  • Module leren - mobiel
  • Notities
  • Ongevallen registreren en beheren
  • Outlook insluiten in uw PaT
  • PaT Chat-overzicht
  • PaT Wiki: uw weg vinden
  • PaT Wiki: zoeken, het AI-antwoord en de beoordeling ervan
  • PaT-mobiele app – overzicht
  • PaT-servicestatus: de statuspagina, statusmeldingen en statusberichten
  • Probleem met 2FA in Outlook
  • SD-elementen
  • SD-overzicht
  • Sectiekoppen
  • Snelle notities
  • Taakbeheer
  • Taakbeheersysteem
  • Takenmuur
  • Verkeerslichtvoortgang
  • Videogesprekken in de mobiele app
  • Zo gebruikt u het PaT Lite-trainingsportaal
  • Zo past u uw browser aan voor de beste weergave van PaT
  • AI-playbook: controleren op andere tickets met hetzelfde nummer
  • Automatische escalatie
  • Beperking
  • Calculated fields and calculated columns
  • Charts: options for lines, bars, axes and single values
  • Chat to SD gebruiken om van een goede manager een geweldige manager te worden
  • Chatbeheer - Pro-tips
  • Data sources: stage filters, dynamic dates and page values
  • De Business Strategy Template beheersen
  • Editor voor draaiboeken: een stap toevoegen die een bestelling annuleert
  • Een modulequiz maken
  • Een rapportagesysteem opzetten
  • Een SD insluiten in het LMS
  • Een UDF configureren: filters, groepering en endpointgegevens
  • Een UDF configureren: kolommen en berekende kolommen
  • Endpoint Manager: endpoints vinden en uw eigen UDF maken
  • Form Builder: layout at each screen size
  • Form Builder: tools and shortcuts
  • Form buttons, PDFs and what happens after submit
  • Formulierbouwer: veldtypen
  • Formulierelementen uploaden naar een SD
  • Formulieren - Gegevens extraheren (de AI-formulierbouwer)
  • Formuliertemplates voor iedereen beschikbaar maken
  • Formuliertestmodus
  • Grids linked to a reporting SD: history charts and review comments
  • Grids: columns, formats and filters
  • Grids: conditional formatting
  • Grids: flatten and transpose data
  • Grids: rows, default values and editing rules
  • Hoe managers OOF kunnen inschakelen voor hun medewerkers
  • Hoe u audits op begrip creëert
  • Hoe u de PAR SD gebruikt
  • Instellen van meldingen voor het voltooien van modules
  • Klantgebonden training instellen
  • Live H&S-rapportage
  • Module-evidentieaudits maken
  • Modulebeheer: modules vinden en beheren
  • Modules bouwen in de Module Publisher
  • Opties voor module-inhoud in de Module Publisher
  • Overzicht van PaT-SD-sjablonen
  • PaT SD-kaartpresentatie
  • PaT SD-mapoverzicht
  • Playbook Admin: de tickets achter elke kwaliteits- en kostencategorie
  • Playbook Admin: wanneer uw schaduwuitvoering klaar is om te beoordelen
  • Playbook-editor: een portalopzoekstap toevoegen
  • Pure formulieren
  • Rich text, file uploads and speech to text
  • SD-beveiligingsinstellingen
  • SD-dashboard: een dashboard bouwen
  • SD-formulieren
  • SD-sjabloonhulpfuncties
  • SDs gebruiken als LMS-document
  • Stacked views, flip cards, tabs and stages
  • Strategie­systeem
  • Veldinstellingen: standaardwaarden, alleen-lezen en overige instellingen
  • Verplichte velden, validatie en containers
  • Voorwaardelijke opmaak
  • PaT Lite: Belangrijke aspecten van PaT die u moet begrijpen
  • Wat is PaT en waarom is het belangrijk
  • PaT Lite: Van chat naar taak
  • PaT Lite: Introductie van Strategy Documents
  • PaT Lite: Kernfilosofie – normen en tactische uitvoering
  • PaT Lite: Intelligente tools die met u meedenken
  • PaT Lite: De toekomst van zakendoen is cultuur
  • Beveiliging
  • Integraties
0/46
Foundation
0/43
Practitioner
0/37
Advanced
0/20
Super User
  1. Documentatie
  2. Geavanceerd
  3. Grids: conditional formatting

Deze pagina is nog niet vertaald en wordt daarom in het Engels weergegeven.

Grids: conditional formatting

Summary Conditional formatting changes how the cells of a Table grid look when they meet a rule: it can give them a background colour, show an icon in them, or turn the matched words into a link…

Check yourself

Uw aanmelding bij PaT wordt gecontroleerd…

How To

Op deze pagina
  • Opening the Conditional Formatting tab
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Step 6
  • Colouring cells from the Data Preview
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Step 6
  • Step 7
  • Step 8
  • Step 9
  • Adding a rule
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Step 6
  • Step 7
  • Step 8
  • Step 9
  • Step 10
  • Rule order, switching rules off and saving
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Step 6
  • Step 7
  • Showing an icon or an image from the image library
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Step 6
  • Step 7
  • Step 8
  • Step 9
  • Turning the matched words into a link
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Flattened grids: colouring a cell by a field it does not show
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Step 6
  • Step 7
  • Step 8
  • Step 9
  • Step 10
  • Step 11
  • Purpose / Intent of the Module
  • Header One

Summary Conditional formatting changes how the cells of a Table grid look when they meet a rule: it can give them a background colour, show an icon in them, or turn the matched words into a link. This lesson is for the person who builds forms or dashboards in PaT. It covers setting up rules with the Data Preview, icons from the image library, web links, and colouring a flattened grid's cells by a field they do not show.

Opening the Conditional Formatting tab

Step 1

Conditional formatting changes the cells of a Table grid that meet a rule you set: it gives them a background colour, an icon or a link. The person who builds the form or dashboard sets up the rules, and everyone who views the grid sees the result.

Step 2

To show or hide a form element depending on an earlier answer, see the lesson Conditional Formatting instead.

Step 3

In SD Form Builder or SD Dashboard, click the Table grid's Edit button, the green pencil at its top right. The Edit form field window opens.

Step 4

Click the Conditional Formatting tab, the last tab along the top of the window.

Step 5

At the top right of the tab, switch on the toggle so it reads Enabled. While it reads Disabled, the grid uses none of its rules.

Step 6

A bar below the toggle says which rules you are editing: Normal Mode for a standard grid, Transposed Mode when Transpose Data is switched on, or Flattened Mode when Flatten Data is switched on, both on the Advanced tab. A transposed grid uses its own set of rules, not the normal ones.

Colouring cells from the Data Preview

Step 1

When the grid takes its rows from an endpoint (on the General tab, Data Mode is Endpoint pulled from a data source), the tab shows a Data Preview of the grid's first 10 rows.

Step 2

If the Data Preview does not show after you choose the endpoint, click Save and Close, then open the Edit form field window again.

Step 3

To colour every cell that holds a certain value, click one such cell in the preview. A Cell Color panel opens below it, naming the column and the value, for example Status = "Done".

Step 4

A colour picked for an empty cell makes a rule with the condition Is Empty, which colours the empty cells of that column.

Step 5

Under Quick Colors, click a colour. Or type a colour code, such as #fde047, under Custom Color and click Apply.

Step 6

PaT adds a rule at the bottom of Formatting Rules: that column Equals that value, with that background colour. The preview shows the colour straight away.

Step 7

To start a rule for one column, click the column's heading in the preview. A new rule for that column opens under Formatting Rules, ready for its condition and value.

Step 8

The preview follows every change you make to the rules, so you can see what a rule does before you save it.

Step 9

A grid whose rows are typed in (Data Mode is Static - Data entered manually) has no Data Preview. Add its rules with Add Rule instead.

Adding a rule

Step 1

Click Add Rule, under Formatting Rules. A new rule opens, set to colour matching cells Light Green.

Step 2

Under Target Column, choose the column whose cells the rule checks, or leave All Columns to check every cell.

Step 3

Under Condition, choose how to compare: Equals, Not Equals, Contains, Does Not Contain, Starts With, Ends With, Is Empty, Is Not Empty, Greater Than, Less Than, Greater Than or Equal, Less Than or Equal, or Between.

Step 4

Type the value to compare with in Value. Is Empty and Is Not Empty need no value.

Step 5

For Between, type the lowest value in From Value and the highest in To Value. Both ends count as a match.

Step 6

Greater Than, Less Than and Between compare numbers: a cell that does not hold a number never matches them.

Step 7

Text comparisons ignore capitals. To match capitals exactly, switch on Case sensitive.

Step 8

Under Background Color, click a colour (point at one to see its name), or type a colour code in Custom Hex.

Step 9

Until a rule is complete, it has a red border and says what is missing, for example Comparison value is required for this condition type.

Step 10

The top line of each rule sums it up, for example Status Equals "Done", with its place in the list, such as #1. Click the line to close the rule or open it again.

Rule order, switching rules off and saving

Step 1

Rules are checked from the top of the list down. The first matching Background Colour rule gives a cell its colour, and the first matching icon or link rule gives it an icon or link, so one cell can show both.

Step 2

The Data Preview shows only the first matching rule for each cell. Check a cell with both a colour and an icon or link on the grid itself.

Step 3

To change the order, drag a rule by the handle of six dots at the left of its top line.

Step 4

To stop a rule for now without deleting it, switch off Enabled at the bottom of the rule. The rule turns pale and no longer applies.

Step 5

To delete a rule, click the red bin at the bottom right of the rule. It goes at once, without asking.

Step 6

If a rule's column is no longer in the grid, a warning sign shows on the rule's top line. Point at it to read This column is no longer available in the grid.

Step 7

Click Save and Close, at the bottom of the window, to keep your rules. Close, at the top right, leaves the grid as it was.

Showing an icon or an image from the image library

Step 1

Under Format Type, choose what a rule does to a matching cell: Background Colour, Chat Link, Icon, SD Link, Form Link or Web Link (URL).

Step 2

Chat Link, SD Link and Form Link show a chat icon, an SD link or a Form link in place of the cell's text. Pointing at it shows Open chat for, View SD for or View Form for, followed by the cell's value.

Step 3

Before you rely on these links, click one on the finished form or dashboard to check that it opens the chat, SD or form you expect.

Step 4

Choose Icon. Under Icon Settings, click one of the ready-made icons: Chat, Form or SD.

Step 5

To use a picture from the image library instead, click Select Image from Library and type part of its name. Each image shows with its name: click one to use it.

Step 6

Select Image from Library only appears when the image library has images to offer.

Step 7

To use a picture from elsewhere on the web, click Custom URL, then paste the picture's web address into Custom Icon URL.

Step 8

Type the icon's width in Icon Width, for example 24px.

Step 9

On the grid, the icon shows in the middle of the cell, in place of the cell's text. In the Data Preview, it shows small, in a cell with a dashed border.

Turning the matched words into a link

Step 1

Choose Web Link (URL) under Format Type, then type the web address the link should open in Link URL. It must start with http:// or https://.

Step 2

With Equals, Contains, Starts With or Ends With, only the matched words become the link. For example, a rule that Contains manual links just the word manual in See the manual for details.

Step 3

With any other condition, the whole cell value becomes the link.

Step 4

A person viewing the grid clicks the link, and the web address opens in a new browser tab. Every cell the rule matches links to the same address.

Step 5

In the Data Preview, the linked words are underlined in blue.

Flattened grids: colouring a cell by a field it does not show

Step 1

A flattened grid has Flatten Data switched on, on the Advanced tab. Each cell shows one value, from the Cell Value Field of the record at that row and column, and the record's other fields are not shown.

Step 2

To colour cells by one of those other fields, open the Advanced tab and choose the field in Fields Available to Formatting. You can choose more than one.

Step 3

Open the Conditional Formatting tab. A flattened grid has its own rules, so the list starts empty. Until you add one, the grid keeps using its normal rules; once you add one, only the flattened grid's own rules apply.

Step 4

The bar at the top of the tab says Flattened Mode on a flattened grid, and the rules listed are the flattened grid's own.

Step 5

Click Add Rule. In place of Target Column, the rule now has Colour the cell based on.

Step 6

In Colour the cell based on, choose the field to test. The rule then tests that field in the record behind each cell, on every cell of the grid. Leave it on What the cell itself shows to test the value the cell displays.

Step 7

Set the Condition, the Value and the colour as for any rule. With Equals and Not Equals, these fields compare numbers as numbers, so 1.00 matches a field that holds 1.

Step 8

A position where nothing has been recorded reads blank for every field. A rule that uses Is Empty colours those positions, so you can see what has not been recorded yet.

Step 9

For example, on a stocktake grid with aisles as rows and bays as columns, each cell shows a count. Choose Status in Fields Available to Formatting, then add a rule based on Status that Equals Over, coloured Red.

Step 10

If no field is chosen in Fields Available to Formatting, each rule shows Target Column instead, which lists the flattened grid's own columns, such as the column that names the rows and each column heading.

Step 11

Build rules based on Fields Available to Formatting with Add Rule, and check their colours on the grid itself.

Purpose / Intent of the Module

A brief description of what this module is about

Header One

Ready? Back to the quiz

Rate this page

Checking your PaT sign-in…

VorigeGrids: columns, formats and filtersVolgende Grids: flatten and transpose data

Op deze pagina

  • Opening the Conditional Formatting tab
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Step 6
  • Colouring cells from the Data Preview
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Step 6
  • Step 7
  • Step 8
  • Step 9
  • Adding a rule
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Step 6
  • Step 7
  • Step 8
  • Step 9
  • Step 10
  • Rule order, switching rules off and saving
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Step 6
  • Step 7
  • Showing an icon or an image from the image library
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Step 6
  • Step 7
  • Step 8
  • Step 9
  • Turning the matched words into a link
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Flattened grids: colouring a cell by a field it does not show
  • Step 1
  • Step 2
  • Step 3
  • Step 4
  • Step 5
  • Step 6
  • Step 7
  • Step 8
  • Step 9
  • Step 10
  • Step 11
  • Purpose / Intent of the Module
  • Header One
PPaT Wiki

Documentatie, kennisbank en communityondersteuning voor People and Tasks.

Documentatie

  • Aan de slag
  • Kernconcepten
  • Integraties
  • API-referentie Binnenkort

Ondersteuning

  • Kennisbank
  • Releaseopmerkingen
  • Communityforum
  • Contact opnemen
  • Servicestatus

Bedrijf

  • PaT
  • Blog
  • Voorwaarden
  • Privacy

© People and Tasks. Alle rechten voorbehouden.